Inner Corner at Base of Wall Spencerport NY

The concrete masonry can be connected to the corner column with a debonded shear anchor. This type of anchor resists out-of-plane (but not in-plane) shear forces and permits movement between the steel column and concrete masonry.

Local Companies

Abr Masonry Inc
(585) 352-4430
186 Ogden Center Rd
Spencerport, NY
Green Lawn Garden Center
(914) 682-4848
454 Ridgeway
White Plains, NY
Pcc Contracting Inc
(518) 785-8000

Albany, NY
Luis Mason Contractor Ltd
(914) 476-0550
406 Saw Mill River Rd
Yonkers, NY
Manley Construction Corp
(718) 389-5365
300 Eckford St
Brooklyn, NY
ADS Masonry
585-698-0756
1900 university ave
rochester, NY
Deco Crete Inc
(631) 751-3326
6 Westwood Ave
Stony Brook, NY
Darius Masonry Inc
(631) 841-3234
500 Marconi Blvd
Copiague, NY
Fladd's Creative Store
(585) 554-3066
322 Gray Rd
Rushville, NY
Ridge Paving Inc
(914) 234-6567
31 Bedford Banksville R
Bedford, NY

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: September 1, 2006

By Walter A. Laska

It is difficult for a mason to properly tool mortar joints at inner wall corners due to the size and shape of the jointer and the acute angle formed by the intersecting brick. As a result, the mortar joints at this location cannot be tooled neatly or compactly. Therefore, inner wall corners provide an ideal location for expansion joints.

Expansion joints located at inner corners are easy to construct and are well concealed. The expansion joint should be totally void of any material which might inhibit movement, and the reinforcement must be discontinuous at the expansion joint.

The concrete masonry can be connected to the corner column with a debonded shear anchor. This type of anchor resists out-of-plane (but not in-plane) shear forces and permits movement between the steel column and concrete masonry. Also, the connection creates a control joint in the concrete masonry backing along the column interface.
Elevation View

The space between the column and the concrete masonry should be kept free of all mortar bridging. If the column and concrete masonry are tightly bonded, any movement of the column is transferred to the masonry, possibly causing the concrete masonry backing to crack.

Flashing continuity must be maintained at the inner corners. The flashing should be cut, lapped, and set in a continuous bed of mastic to prevent water from flowing under the laps.

Click here to read full article from Masonry Construction