Inner Corner at Base of Wall Saugerties NY

The concrete masonry can be connected to the corner column with a debonded shear anchor. This type of anchor resists out-of-plane (but not in-plane) shear forces and permits movement between the steel column and concrete masonry.

Local Companies

Ml Stumpf Contractng
(631) 580-0078
21 Wade Dr
Lake Grove, NY
Scott Charles A
(845) 358-4646
60 Mountainview Ave
Nyack, NY
Furey Stone Specialties
(518) 789-3175
34 Park St
Millerton, NY
Jacob's Masonry Corp
(718) 645-4858
2569 Stillwell Ave
Brooklyn, NY
Saga House Condominium
(212) 879-2611
157 E 74th St
New York, NY
Moe Masonry Inc
(631) 287-4887
100 Sandy Hollow Rd
Southampton, NY
Gould Laura
(845) 651-5421
346 Reservoir Rd
Goshen, NY
L A Sesto Constr Corp
(631) 243-1818
80 Jefferson Ave
Bay Shore, NY
Classic Masonry Ltd
(845) 526-8511
110 Kramers Pond Rd
Putnam Valley, NY
Frezza A Contrctng Corp
(516) 746-3508
76 Marcus Ave
New Hyde Park, NY

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: September 1, 2006

By Walter A. Laska

It is difficult for a mason to properly tool mortar joints at inner wall corners due to the size and shape of the jointer and the acute angle formed by the intersecting brick. As a result, the mortar joints at this location cannot be tooled neatly or compactly. Therefore, inner wall corners provide an ideal location for expansion joints.

Expansion joints located at inner corners are easy to construct and are well concealed. The expansion joint should be totally void of any material which might inhibit movement, and the reinforcement must be discontinuous at the expansion joint.

The concrete masonry can be connected to the corner column with a debonded shear anchor. This type of anchor resists out-of-plane (but not in-plane) shear forces and permits movement between the steel column and concrete masonry. Also, the connection creates a control joint in the concrete masonry backing along the column interface.
Elevation View

The space between the column and the concrete masonry should be kept free of all mortar bridging. If the column and concrete masonry are tightly bonded, any movement of the column is transferred to the masonry, possibly causing the concrete masonry backing to crack.

Flashing continuity must be maintained at the inner corners. The flashing should be cut, lapped, and set in a continuous bed of mastic to prevent water from flowing under the laps.

Click here to read full article from Masonry Construction

Related Articles
- High-Efficiency Products Saugerties NY
This article talks about green products such as wooden wall. The WD66 wood folding glass wall system comes with krypton-filled Heat Mirror glazing, providing an energy-efficient solution for large openings. The glass has a 0.23 U-factor and an SHGC of 0.31.
- Flashing Factors Saugerties NY
- Hitachi KM 12VC Router Combination Kit Saugerties NY
- Galvanized Wall Ties Saugerties NY
- Drape Wall and Cloak Wall Saugerties NY
- Flashing in Siding Installations Saugerties NY
- How Masonry Buildings Resist Earthquakes Saugerties NY
- Home Siding Tips Saugerties NY
- Guidelines for Assembling Scaffolding Saugerties NY
- Galvanized Wall Ties Saugerties NY