Inner Corner at Base of Wall Queensbury NY

The concrete masonry can be connected to the corner column with a debonded shear anchor. This type of anchor resists out-of-plane (but not in-plane) shear forces and permits movement between the steel column and concrete masonry.

Local Companies

Mauser John J
(631) 395-7231
26 Floyd Rd N
Shirley, NY
Segundo Guaman Genl Contractors
(914) 736-1571
1452 Riverview Ave
Peekskill, NY
Signature Stone
(631) 289-5258
205 Peconic Ave
Medford, NY
Mjc Mason Contracting Inc
(914) 739-1316
42 Fowler Ave
Cortlandt Manor, NY
Jenlee Enterprises
(716) 892-3761
45 Stanley St
Buffalo, NY
Larosa Anthony Custom Masonry
(518) 745-5202
17 Moorwood Dr
Queensbury, NY
Dana Restorations Inc
(718) 931-7200
3073 Buhre Ave Apt 1F
Bronx, NY
Bricks & Stones Masonry
(518) 799-2317

Stuyvesant Falls, NY
Bradley John General Contractor
(607) 432-7908
164 Moffre Rd
Maryland, NY
Chorzepa Construction Corp
(631) 345-5586
56 Ridge Rd
Ridge, NY

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: September 1, 2006

By Walter A. Laska

It is difficult for a mason to properly tool mortar joints at inner wall corners due to the size and shape of the jointer and the acute angle formed by the intersecting brick. As a result, the mortar joints at this location cannot be tooled neatly or compactly. Therefore, inner wall corners provide an ideal location for expansion joints.

Expansion joints located at inner corners are easy to construct and are well concealed. The expansion joint should be totally void of any material which might inhibit movement, and the reinforcement must be discontinuous at the expansion joint.

The concrete masonry can be connected to the corner column with a debonded shear anchor. This type of anchor resists out-of-plane (but not in-plane) shear forces and permits movement between the steel column and concrete masonry. Also, the connection creates a control joint in the concrete masonry backing along the column interface.
Elevation View

The space between the column and the concrete masonry should be kept free of all mortar bridging. If the column and concrete masonry are tightly bonded, any movement of the column is transferred to the masonry, possibly causing the concrete masonry backing to crack.

Flashing continuity must be maintained at the inner corners. The flashing should be cut, lapped, and set in a continuous bed of mastic to prevent water from flowing under the laps.

Click here to read full article from Masonry Construction