Inner Corner at Base of Wall Pearl River NY

The concrete masonry can be connected to the corner column with a debonded shear anchor. This type of anchor resists out-of-plane (but not in-plane) shear forces and permits movement between the steel column and concrete masonry.

Local Companies

K B Masonry LLC
(973) 831-0018
58 Townsend Road
Wanaque, NJ
Ridge Paving Inc
(914) 234-6567
31 Bedford Banksville R
Bedford, NY
Moe Masonry Inc
(631) 287-4887
100 Sandy Hollow Rd
Southampton, NY
Gould Laura
(845) 651-5421
346 Reservoir Rd
Goshen, NY
L A Sesto Constr Corp
(631) 243-1818
80 Jefferson Ave
Bay Shore, NY
E C Hufnagel Landscaping Inc
(201) 869-5680
51 Broad Ave Apt 1
Fairview, NJ
park place pavers
(914)667-1735
255 rich ave
mount vernon, NY
Manley Construction Corp
(718) 389-5365
300 Eckford St
Brooklyn, NY
Ml Stumpf Contractng
(631) 580-0078
21 Wade Dr
Lake Grove, NY
Scott Charles A
(845) 358-4646
60 Mountainview Ave
Nyack, NY

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: September 1, 2006

By Walter A. Laska

It is difficult for a mason to properly tool mortar joints at inner wall corners due to the size and shape of the jointer and the acute angle formed by the intersecting brick. As a result, the mortar joints at this location cannot be tooled neatly or compactly. Therefore, inner wall corners provide an ideal location for expansion joints.

Expansion joints located at inner corners are easy to construct and are well concealed. The expansion joint should be totally void of any material which might inhibit movement, and the reinforcement must be discontinuous at the expansion joint.

The concrete masonry can be connected to the corner column with a debonded shear anchor. This type of anchor resists out-of-plane (but not in-plane) shear forces and permits movement between the steel column and concrete masonry. Also, the connection creates a control joint in the concrete masonry backing along the column interface.
Elevation View

The space between the column and the concrete masonry should be kept free of all mortar bridging. If the column and concrete masonry are tightly bonded, any movement of the column is transferred to the masonry, possibly causing the concrete masonry backing to crack.

Flashing continuity must be maintained at the inner corners. The flashing should be cut, lapped, and set in a continuous bed of mastic to prevent water from flowing under the laps.

Click here to read full article from Masonry Construction

Related Articles
- Flashing in Siding Installations Pearl River NY
A constant problem that contractors see in siding installations is improper flashing or, even worse, no flashing at all. Relying on caulk alone to keep water from leaking into homes is not a good practice. Whether you're talking about wood, fiber-cement, or vinyl siding, three areas in particular can prove problematic.
- Guidelines for Assembling Scaffolding Pearl River NY
- Hitachi KM 12VC Router Combination Kit Pearl River NY
- Flashing Factors Pearl River NY
- Home Siding Tips Pearl River NY
- Galvanized Wall Ties Pearl River NY
- How Masonry Buildings Resist Earthquakes Pearl River NY
- Galvanized Wall Ties Pearl River NY
- Drape Wall and Cloak Wall Pearl River NY
- High-Efficiency Products Pearl River NY