Inner Corner at Base of Wall Monsey NY

The concrete masonry can be connected to the corner column with a debonded shear anchor. This type of anchor resists out-of-plane (but not in-plane) shear forces and permits movement between the steel column and concrete masonry.

Local Companies

park place pavers
(914)667-1735
255 rich ave
mount vernon, NY
Reile's Contracting
(315) 866-7984
422 N Bellinger St
Herkimer, NY
M G M Masonry Inc
(631) 907-4479
32 West Way
East Hampton, NY
Groenendaal Charles
(716) 326-4867
16 Cottage St
Westfield, NY
Mountain Stone Masons
(518) 325-1545

Hillsdale, NY
K B Masonry LLC
(973) 831-0018
58 Townsend Road
Wanaque, NJ
De Deo Construction Co
(518) 279-1103
15 Miller Ln
Troy, NY
Jem Contracting Corp
(718) 726-3499
5943 60th St
Maspeth, NY
Everything Masonry Corp
(718) 420-1970
903 Hylan Blvd
Staten Island, NY
Hull Ronald G
(631) 698-8873
2 Avalon Ct
Ronkonkoma, NY

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: September 1, 2006

By Walter A. Laska

It is difficult for a mason to properly tool mortar joints at inner wall corners due to the size and shape of the jointer and the acute angle formed by the intersecting brick. As a result, the mortar joints at this location cannot be tooled neatly or compactly. Therefore, inner wall corners provide an ideal location for expansion joints.

Expansion joints located at inner corners are easy to construct and are well concealed. The expansion joint should be totally void of any material which might inhibit movement, and the reinforcement must be discontinuous at the expansion joint.

The concrete masonry can be connected to the corner column with a debonded shear anchor. This type of anchor resists out-of-plane (but not in-plane) shear forces and permits movement between the steel column and concrete masonry. Also, the connection creates a control joint in the concrete masonry backing along the column interface.
Elevation View

The space between the column and the concrete masonry should be kept free of all mortar bridging. If the column and concrete masonry are tightly bonded, any movement of the column is transferred to the masonry, possibly causing the concrete masonry backing to crack.

Flashing continuity must be maintained at the inner corners. The flashing should be cut, lapped, and set in a continuous bed of mastic to prevent water from flowing under the laps.

Click here to read full article from Masonry Construction

Related Articles
- Flashing in Siding Installations Monsey NY
A constant problem that contractors see in siding installations is improper flashing or, even worse, no flashing at all. Relying on caulk alone to keep water from leaking into homes is not a good practice. Whether you're talking about wood, fiber-cement, or vinyl siding, three areas in particular can prove problematic.
- Drape Wall and Cloak Wall Monsey NY
- Galvanized Wall Ties Monsey NY
- High-Efficiency Products Monsey NY
- Flashing Factors Monsey NY
- Guidelines for Assembling Scaffolding Monsey NY
- Home Siding Tips Monsey NY
- Hitachi KM 12VC Router Combination Kit Monsey NY
- How Masonry Buildings Resist Earthquakes Monsey NY
- Galvanized Wall Ties Monsey NY