Inner Corner at Base of Wall Fulton NY

The concrete masonry can be connected to the corner column with a debonded shear anchor. This type of anchor resists out-of-plane (but not in-plane) shear forces and permits movement between the steel column and concrete masonry.

Local Companies

La Face Tile & Mason Co Inc
(315) 371-6964
414 Butternut St
Syracuse, NY
Tersal Construction
(315) 476-6762
109 Factory Ave
Syracuse, NY
Baldwin Lewis Masonry Contracting
(315) 593-7745
160 Lakeshore Rd
Fulton, NY
Austin Don Masonry
(315) 592-5278
54 Wood Ridge Ln
Fulton, NY
Capital Masonry Contractors
(518) 399-1979
34 Sweetman Rd
Burnt Hills, NY
Hopkins & Reilly Mason Contractors Inc
(315) 474-0161
419 Hiawatha Blvd E
Syracuse, NY
Schneid Construction
(315) 479-9004
210 6th St
Syracuse, NY
Quality Masonry & Development
(315) 593-7044
2036 County Route 176
Fulton, NY
Baldwin Joseph Construction
(315) 598-3526
689 Silk Rd
Fulton, NY
Perrella Masonry
(845) 985-0288
500 Alpha Rd
Grahamsville, NY

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: September 1, 2006

By Walter A. Laska

It is difficult for a mason to properly tool mortar joints at inner wall corners due to the size and shape of the jointer and the acute angle formed by the intersecting brick. As a result, the mortar joints at this location cannot be tooled neatly or compactly. Therefore, inner wall corners provide an ideal location for expansion joints.

Expansion joints located at inner corners are easy to construct and are well concealed. The expansion joint should be totally void of any material which might inhibit movement, and the reinforcement must be discontinuous at the expansion joint.

The concrete masonry can be connected to the corner column with a debonded shear anchor. This type of anchor resists out-of-plane (but not in-plane) shear forces and permits movement between the steel column and concrete masonry. Also, the connection creates a control joint in the concrete masonry backing along the column interface.
Elevation View

The space between the column and the concrete masonry should be kept free of all mortar bridging. If the column and concrete masonry are tightly bonded, any movement of the column is transferred to the masonry, possibly causing the concrete masonry backing to crack.

Flashing continuity must be maintained at the inner corners. The flashing should be cut, lapped, and set in a continuous bed of mastic to prevent water from flowing under the laps.

Click here to read full article from Masonry Construction

Related Articles
- How Masonry Buildings Resist Earthquakes Fulton NY
Because masonry buildings usually have many structural wall elements, they tend to be stiff laterally. Because masonry buildings are stiff laterally, even moderate earthquakes can subject them to large shear loads at their base.
- Guidelines for Assembling Scaffolding Fulton NY
- High-Efficiency Products Fulton NY
- Drape Wall and Cloak Wall Fulton NY
- Flashing in Siding Installations Fulton NY
- Flashing Factors Fulton NY
- Galvanized Wall Ties Fulton NY
- Galvanized Wall Ties Fulton NY
- Hitachi KM 12VC Router Combination Kit Fulton NY
- Home Siding Tips Fulton NY