Inner Corner at Base of Wall Freeport NY

The concrete masonry can be connected to the corner column with a debonded shear anchor. This type of anchor resists out-of-plane (but not in-plane) shear forces and permits movement between the steel column and concrete masonry.

Local Companies

Hatiya Contracting Inc
718-395-7744
9322 74th Place
Woodhaven, NY
Rapid Masonry Restoration
(718) 424-8304
7906 37th Ave
Jackson Heights, NY
Mr B Home Repairs
(718) 206-4900
10640 Guy R Brewer Blvd
Jamaica, NY
Bixby Brink Landscape Contractors
(631) 673-7650
16 Gloria Ln
Huntington, NY
Peter Home Improvements Corp
(718) 699-8441
5841 Waldron St
Flushing, NY
Begolli Brother Construction and Restoration
(516) 476-6166
134 maple avenue
westbury, NY
SLR Industries Inc.
631 893 3934
411 Broadway
West Babylon, NY
Malatesta Paladino Inc
(718) 523-5656
13919 109th Ave
Jamaica, NY
Sanyo Enterprises Usa Inc
(718) 846-8100
11617 Sutphin Blvd
Jamaica, NY
Prima Plastering Inc
(631) 427-8699
77 Soundview Rd
Huntington, NY

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: September 1, 2006

By Walter A. Laska

It is difficult for a mason to properly tool mortar joints at inner wall corners due to the size and shape of the jointer and the acute angle formed by the intersecting brick. As a result, the mortar joints at this location cannot be tooled neatly or compactly. Therefore, inner wall corners provide an ideal location for expansion joints.

Expansion joints located at inner corners are easy to construct and are well concealed. The expansion joint should be totally void of any material which might inhibit movement, and the reinforcement must be discontinuous at the expansion joint.

The concrete masonry can be connected to the corner column with a debonded shear anchor. This type of anchor resists out-of-plane (but not in-plane) shear forces and permits movement between the steel column and concrete masonry. Also, the connection creates a control joint in the concrete masonry backing along the column interface.
Elevation View

The space between the column and the concrete masonry should be kept free of all mortar bridging. If the column and concrete masonry are tightly bonded, any movement of the column is transferred to the masonry, possibly causing the concrete masonry backing to crack.

Flashing continuity must be maintained at the inner corners. The flashing should be cut, lapped, and set in a continuous bed of mastic to prevent water from flowing under the laps.

Click here to read full article from Masonry Construction

Related Articles
- High-Efficiency Products Freeport NY
This article talks about green products such as wooden wall. The WD66 wood folding glass wall system comes with krypton-filled Heat Mirror glazing, providing an energy-efficient solution for large openings. The glass has a 0.23 U-factor and an SHGC of 0.31.
- Flashing in Siding Installations Freeport NY
- Drape Wall and Cloak Wall Freeport NY
- How Masonry Buildings Resist Earthquakes Freeport NY
- Home Siding Tips Freeport NY
- Hitachi KM 12VC Router Combination Kit Freeport NY
- Galvanized Wall Ties Freeport NY
- Flashing Factors Freeport NY
- Galvanized Wall Ties Freeport NY
- Guidelines for Assembling Scaffolding Freeport NY