Inner Corner at Base of Wall Fairport NY

The concrete masonry can be connected to the corner column with a debonded shear anchor. This type of anchor resists out-of-plane (but not in-plane) shear forces and permits movement between the steel column and concrete masonry.

Local Companies

Morris Restoration Llc
(716) 894-0102
40 Appenheimer Ave
Buffalo, NY
M Z Contracting Corp
(914) 966-7100
33 S Broadway
Yonkers, NY
Blue Ribbon Contracting & Design Inc
(631) 744-7555
66 Route 25A
Shoreham, NY
Casler Masonry Inc-Warehouse
(315) 253-5374
692 Cayuga Rd
Cayuga, NY
Bierwagen David Rpt
(315) 422-7656
550 Harrison St
Syracuse, NY
ADS Masonry
585-698-0756
1900 university ave
rochester, NY
Ryan Mike Construction Co
(315) 689-6254
109 South St
Elbridge, NY
Giarnella J & Son Inc
(718) 792-0967
1600 Stillwell Ave
Bronx, NY
Allied Builders Supply Corp
(516) 826-9057
3550 Merrick Rd
Seaford, NY
Lari Construction Limited
(315) 701-0444
2572 Erie Blvd E
Syracuse, NY

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: September 1, 2006

By Walter A. Laska

It is difficult for a mason to properly tool mortar joints at inner wall corners due to the size and shape of the jointer and the acute angle formed by the intersecting brick. As a result, the mortar joints at this location cannot be tooled neatly or compactly. Therefore, inner wall corners provide an ideal location for expansion joints.

Expansion joints located at inner corners are easy to construct and are well concealed. The expansion joint should be totally void of any material which might inhibit movement, and the reinforcement must be discontinuous at the expansion joint.

The concrete masonry can be connected to the corner column with a debonded shear anchor. This type of anchor resists out-of-plane (but not in-plane) shear forces and permits movement between the steel column and concrete masonry. Also, the connection creates a control joint in the concrete masonry backing along the column interface.
Elevation View

The space between the column and the concrete masonry should be kept free of all mortar bridging. If the column and concrete masonry are tightly bonded, any movement of the column is transferred to the masonry, possibly causing the concrete masonry backing to crack.

Flashing continuity must be maintained at the inner corners. The flashing should be cut, lapped, and set in a continuous bed of mastic to prevent water from flowing under the laps.

Click here to read full article from Masonry Construction