Incorrect Testing Practices Suffern NY

Conducting other tests improperly can also cause rejection of in-spec concrete at the jobsite in Suffern. Have your drivers learn the correct methods for sampling concrete, measuring slump and air content, and making and curing strength-test specimens in the field. They're your first line of defense against needlessly rejected loads of concrete.

Local Companies

N&S GENERALCONTRACTOR
(973) 725-4058
23 10th ave
Hawthorne, NJ
McFarlane Aspalt
201-327-5258
120 E Main St
Ramsey, NJ
LL Construction Enterprises, Inc.
914-447-8246
211 Ashburton Ave
Yonkers, NY
Dennis Forte Construction, LLC
914-202-8720
53 Lispenard Ave.
Bronxville, NY
Kilpatrick Contractor
(914) 236-5421
49 Huber Place
Yonkers, NY
McFarlane Brothers Asphalt Paving
201-327-5258
120 East Main St. Suite 337
Ramsey, NJ
american weatherproofing system
973 9306105
629 river st
paterson, NJ
fagundez painting inc
305 742 9220-973 341 6391
556 market st
paterson, NJ
Gume &Sons
(914) 433-4098
103 Palisade ave
Yonkers, NY
Van Go General Contracting
(201) 387-9013
326 So. Washington Ave
Bergenfield, NJ
Data Provided by:
  

Source: THE CONCRETE PRODUCER/CONCRETE JOURNAL MAGAZINE
Publication date: November 1, 1998

By No Author

Abstract:

Erroneous results from improper testing can cause unnecessary rejection of good- quality concrete. Train your drivers to recognize some of the more common testing errors. This article is based on information presented in Down the Chute, the publication of Florida Independent Concrete and Associated Products Inc.The problem isn't confined to strength tests. Conducting other tests improperly can also cause rejection of in-spec concrete at the jobsite. Have your drivers learn the correct methods for sampling concrete, measuring slump and air content, and making and curing strength-test specimens in the field. They're your first line of defense against needlessly rejected loads of concrete.Some improper practices are:

  • Excessive prewetting, leaving surplus water in the container
  • Sampling from the form into which the concrete has been placed
  • Failure to remix the concrete sample in the sample container before starting the tests
  • Failure to use an aggregate correction factor
  • Use of the pressure meter to measure air content
  • Failure to firmly support the base plate
  • Base plate not large enough, allowing high-slump concrete to spill over the edge of the plate
  • Base not level
  • Dampening the slump cone and base leaving a puddle of water on the base
  • Measuring the difference between the top of the cone and the highest or lowest point on the slumped specimen
  • Fai...

Click here to read full article from The Concrete Producer

Related Articles
- Green Construction Suffern NY
Sustainable building practices are gaining acceptance in the competitive world of concrete construction. The editors of Concrete Construction and The Concrete Producer have created a new award program to recognize the concrete community's innovative contributions to green building.
- Festool Circ Saw and Guide Rail System Suffern NY
Related Local Event
Long Island Building & Facility Maintenance Show
Dates: 5/5/09 - 5/8/20
Location: David S. Mack Sports & Exhibition Complex - Hofstra University
Hempstead, NY
View Details