How to Choose a Grout Vibrator Saugerties NY

Using a puddling stick to consolidate grout is no longer acceptable in most building codes. Changing codes now require that grout pours greater than 12 inches be both consolidated and reconsolidated by mechanical vibration in Saugerties.

Local Companies

George Lumber & Bldg Materials Inc
(315) 429-9962
40 McKinley Ave
Dolgeville, NY
Lowe's of Vestal
(607) 770-4442
225 Sycamore St
Vestal, NY
Rogers & Tenbrook of Dansville
(585) 335-2256
43 West Ave
Dansville, NY
Auburndale Mason Supls Inc
(718) 357-7889
4002 Francis Lewis Blvd
Bayside, NY
Millspaugh Bros Inc
(607) 387-4641
50 Cayuga St
Trumansburg, NY
Saugerties Lumber Co Inc
(845) 246-4915
Ulster Ave
Saugerties, NY
Northeast Panel and Truss
(845) 339-3656
9 Kieffer Ln
Kingston, NY
Bellerose Lumber
(718) 347-3321
24815 Jericho Tpke
Bellerose, NY
Rucker Lumber Inc
(716) 941-5223
Boston State Rd
Boston, NY
Sammarco Stone & Supply Inc
(914) 636-6563
173 Oak St
New Rochelle, NY

Provided By:

Source: Masonry Construction
Publication date: April 1, 1992

By John A. Koski

Using a puddling stick to consolidate grout is no longer acceptable in most building codes. Changing codes now require that grout pours greater than 12 inches be both consolidated and reconsolidated by mechanical vibration. Grout vibrators achieve their vibratory motion by means of an eccentric in the head. The head is connected by a flexible shaft to a power source. The head, shaft, and power source are the three main components of a grout vibrator.

POWER SOURCE

Most grout vibrators are powered by a gasoline engine or electric motor. Electric vibrators have an advantage in that they are compact, lightweight, and require little maintenance. Vibrators powered by gasoline engines are ideal for projects whereelectricity is not available.

SHAFT LENGTH

The shaft transfers power from the engine or motor to the head. To determine the best shaft length for a job, first determine the height of the lift. Add to this 1 foot for succeeding lifts. Finally add 4 feet so that the vibrator operator will be able to work comfortably from a standing position.

HEAD DIAMETER

The diameter of the head must be small enough to fit into the limited space found in the cores of masonry units and in the restricted spaces in cavity walls.

DESIGN CONSIDERATIONS

A grout vibrator should be rugged in design so that it can withstand rough handling.

Click here to read full article from Masonry Construction

Related Articles
- Form-Release Agents Saugerties NY
Form-release agents or form oils represent only a small fraction of the cost of a manufactured concrete item, but they have a big influence on the quality and appearance of the concrete surface.
- Green Home Improvement Products Saugerties NY
- Eliminating Swirls in Precast Panels Saugerties NY
- Grout Pumps Saugerties NY
- Forklift Maintenance Tips Saugerties NY
- Growing Your Business Saugerties NY