How Masonry Buildings Resist Earthquakes Tarrytown NY

Because masonry buildings usually have many structural wall elements, they tend to be stiff laterally. Because masonry buildings in Tarrytown are stiff laterally, even moderate earthquakes can subject them to large shear loads at their base.

Local Companies

Window Designs by Suzi
(914) 636-6859
23 Stephenson Blvd.
New Rochelle, NY
ADG Construction LLc.
(201) 446-9491
307 Dorothy Street
Fair Lawn, NJ
Cobble King Inc
(631) 924-6202
530 North St
Manorville, NY
United Masonry Corp
(516) 799-0555
5648 Old Sunrise Hwy
Massapequa, NY
Mike's Masonry & Concrete
(914) 245-1811
1076 Spillway Rd
Shrub Oak, NY
KJ Construction
(646) 302-2481
3536 Bronxwood Avenue
Bronx, NY
911 Restoration
201-646-0055
320 Washington Ave
Hackensack, NY
A & J Masonry Construction Corp
(718) 845-4507
9408 Albert Rd
Jamaica, NY
Henry Devries Inc
(845) 342-2148
558 County Route 49
Middletown, NY
Belton Masonry
(518) 399-0675
47 Ashdown Rd
Ballston Lake, NY
Data Provided by:
  

Provided By:

Source: Masonry Construction
Publication date: January 1, 1990

By Richard E. Klingner

How vulnerable are masonry buildings to earthquakes? How can they be designed to resist earthquakes?

HOW MASONRY BUILDINGS RESPOND

Because masonry buildings usually have many structural wall elements, they tend to be stiff laterally. Because masonry buildings are stiff laterally, even moderate earthquakes can subject them to large shear loads at their base.

For a typical masonry building, these shear loads can be calculated in the following way: Base shear load= (building mass) x (earthquake ground acceleration) x (dynamic amplification factor).

MASONRY SEISMIC DESIGN

Though even moderate ground accelerations can subject masonry buildings to large shear loads, masonry buildings can still be designed to resist these loads. In general, the designer must estimate the lateral inertial forces acting on each element and provide for the transfer of these forces down to the foundation.

INELASTIC RESPONSE OF MASONRY BUILDINGS

A masonry building's earthquake resistance has been described here as a function of wall layout, wall area, and wall strength. These characteristics are often sufficient. Enough wall area can often be provided so that even during a strong earthquake the building's walls remain basically elastic, without any yielding of reinforcement. However, architectural constraints may limit the wall area that can be provided.

Click here to read full article from Masonry Construction

Related Articles
- Grout Pumps Tarrytown NY
The GHP 2000 pump handles grout or shotcrete, and is effective in grouting small ICF projects. The product is powered by a 20-hp gasoline engine and delivers 7 cu yd of grout/hr. It has a peristaltic pump, comes with built-in jack stands to stabilize the machine, and weighs 1000 lb.
- Inner Corner at Base of Wall Tarrytown NY
- Galvanized Wall Ties Tarrytown NY
- Flue Liners for Masonry Chimneys Tarrytown NY
- Graphisoft EcoDesigner Tarrytown NY
- High Cement Content Problems Tarrytown NY
- Galvanized Wall Ties Tarrytown NY
- Hand-Held Power Saws Tarrytown NY
- Flashing at Sills Tarrytown NY
- Flashing Factors Tarrytown NY