How Masonry Buildings Resist Earthquakes Nyack NY

Because masonry buildings usually have many structural wall elements, they tend to be stiff laterally. Because masonry buildings in Nyack are stiff laterally, even moderate earthquakes can subject them to large shear loads at their base.

Local Companies

Window Designs by Suzi
(914) 636-6859
23 Stephenson Blvd.
New Rochelle, NY
ADG Construction LLc.
(201) 446-9491
307 Dorothy Street
Fair Lawn, NJ
Bullis Landscape
(845) 358-1142

Nyack, NY
KJ Construction
(646) 302-2481
3536 Bronxwood Avenue
Bronx, NY
911 Restoration
201-646-0055
320 Washington Ave
Hackensack, NY
Scott Charles A
(845) 358-4646
60 Mountainview Ave
Nyack, NY
Data Provided by:
  

Provided By:

Source: Masonry Construction
Publication date: January 1, 1990

By Richard E. Klingner

How vulnerable are masonry buildings to earthquakes? How can they be designed to resist earthquakes?

HOW MASONRY BUILDINGS RESPOND

Because masonry buildings usually have many structural wall elements, they tend to be stiff laterally. Because masonry buildings are stiff laterally, even moderate earthquakes can subject them to large shear loads at their base.

For a typical masonry building, these shear loads can be calculated in the following way: Base shear load= (building mass) x (earthquake ground acceleration) x (dynamic amplification factor).

MASONRY SEISMIC DESIGN

Though even moderate ground accelerations can subject masonry buildings to large shear loads, masonry buildings can still be designed to resist these loads. In general, the designer must estimate the lateral inertial forces acting on each element and provide for the transfer of these forces down to the foundation.

INELASTIC RESPONSE OF MASONRY BUILDINGS

A masonry building's earthquake resistance has been described here as a function of wall layout, wall area, and wall strength. These characteristics are often sufficient. Enough wall area can often be provided so that even during a strong earthquake the building's walls remain basically elastic, without any yielding of reinforcement. However, architectural constraints may limit the wall area that can be provided.

Click here to read full article from Masonry Construction

Related Articles
- High Cement Content Problems Nyack NY
Portland cement gives a mortar added durability, high early strength, a consistent hardening rate, and high compressive and bond strengths. However, mortar with excessively high cement contents can affect water permeability and durability of the masonry.
- Galvanized Wall Ties Nyack NY
- Inner Corner at Base of Wall Nyack NY
- Flashing Factors Nyack NY
- Flue Liners for Masonry Chimneys Nyack NY
- Flashing at Sills Nyack NY
- Graphisoft EcoDesigner Nyack NY
- Galvanized Wall Ties Nyack NY
- Grout Pumps Nyack NY
- Hand-Held Power Saws Nyack NY