How Masonry Buildings Resist Earthquakes Nanuet NY

Because masonry buildings usually have many structural wall elements, they tend to be stiff laterally. Because masonry buildings in Nanuet are stiff laterally, even moderate earthquakes can subject them to large shear loads at their base.

Local Companies

Window Designs by Suzi
(914) 636-6859
23 Stephenson Blvd.
New Rochelle, NY
ADG Construction LLc.
(201) 446-9491
307 Dorothy Street
Fair Lawn, NJ
Barrisford Equipt Ltd
(845) 624-8197
15 Fisher Ave
Nanuet, NY
Ridge Paving Inc
(914) 234-6567
31 Bedford Banksville R
Bedford, NY
Moe Masonry Inc
(631) 287-4887
100 Sandy Hollow Rd
Southampton, NY
KJ Construction
(646) 302-2481
3536 Bronxwood Avenue
Bronx, NY
911 Restoration
201-646-0055
320 Washington Ave
Hackensack, NY
Montebello Masonry
(845) 371-7199
499 Old Nyack Tpke
Nanuet, NY
Eberling Henry R Mason
(845) 623-4905
14 Oakwood Rd
Nanuet, NY
Manley Construction Corp
(718) 389-5365
300 Eckford St
Brooklyn, NY
Data Provided by:
  

Provided By:

Source: Masonry Construction
Publication date: January 1, 1990

By Richard E. Klingner

How vulnerable are masonry buildings to earthquakes? How can they be designed to resist earthquakes?

HOW MASONRY BUILDINGS RESPOND

Because masonry buildings usually have many structural wall elements, they tend to be stiff laterally. Because masonry buildings are stiff laterally, even moderate earthquakes can subject them to large shear loads at their base.

For a typical masonry building, these shear loads can be calculated in the following way: Base shear load= (building mass) x (earthquake ground acceleration) x (dynamic amplification factor).

MASONRY SEISMIC DESIGN

Though even moderate ground accelerations can subject masonry buildings to large shear loads, masonry buildings can still be designed to resist these loads. In general, the designer must estimate the lateral inertial forces acting on each element and provide for the transfer of these forces down to the foundation.

INELASTIC RESPONSE OF MASONRY BUILDINGS

A masonry building's earthquake resistance has been described here as a function of wall layout, wall area, and wall strength. These characteristics are often sufficient. Enough wall area can often be provided so that even during a strong earthquake the building's walls remain basically elastic, without any yielding of reinforcement. However, architectural constraints may limit the wall area that can be provided.

Click here to read full article from Masonry Construction

Related Articles
- High Cement Content Problems Nanuet NY
Portland cement gives a mortar added durability, high early strength, a consistent hardening rate, and high compressive and bond strengths. However, mortar with excessively high cement contents can affect water permeability and durability of the masonry.
- Flue Liners for Masonry Chimneys Nanuet NY
- Hand-Held Power Saws Nanuet NY
- Inner Corner at Base of Wall Nanuet NY
- Flashing Factors Nanuet NY
- Graphisoft EcoDesigner Nanuet NY
- Galvanized Wall Ties Nanuet NY
- Galvanized Wall Ties Nanuet NY
- Flashing at Sills Nanuet NY
- Grout Pumps Nanuet NY