How Masonry Buildings Resist Earthquakes Manlius NY

Because masonry buildings usually have many structural wall elements, they tend to be stiff laterally. Because masonry buildings in Manlius are stiff laterally, even moderate earthquakes can subject them to large shear loads at their base.

Local Companies

Barrisford Equipt Ltd
(845) 624-8197
15 Fisher Ave
Nanuet, NY
Cornerstone Masonry Inc
(631) 862-6049
177 Tredwell Ave
Saint James, NY
Prestige Pool & Patio
(845) 267-4125
60 N Harrison Ave
Congers, NY
Mid Island Masonary
(631) 969-9724
1 Avon Pl
Bay Shore, NY
Atm
(631) 476-4332
Route 25A
Port Jefferson Station, NY
Shalimar Brokerage Llc
(212) 319-6021
950 3rd Ave Lbby 3
New York, NY
Jr Mason Co
(914) 476-9673
893 McLean Ave
Yonkers, NY
A Marra & Sons Inc
(516) 671-1679
137 Glenwood Rd
Glenwood Landing, NY
D L R Commercial Corp
(516) 775-0887
17 New Hyde Park Rd
Franklin Square, NY
Trulys Contracting Corp
(631) 218-8238
186 Locust Ave
Oakdale, NY

Provided By:

Source: Masonry Construction
Publication date: January 1, 1990

By Richard E. Klingner

How vulnerable are masonry buildings to earthquakes? How can they be designed to resist earthquakes?

HOW MASONRY BUILDINGS RESPOND

Because masonry buildings usually have many structural wall elements, they tend to be stiff laterally. Because masonry buildings are stiff laterally, even moderate earthquakes can subject them to large shear loads at their base.

For a typical masonry building, these shear loads can be calculated in the following way: Base shear load= (building mass) x (earthquake ground acceleration) x (dynamic amplification factor).

MASONRY SEISMIC DESIGN

Though even moderate ground accelerations can subject masonry buildings to large shear loads, masonry buildings can still be designed to resist these loads. In general, the designer must estimate the lateral inertial forces acting on each element and provide for the transfer of these forces down to the foundation.

INELASTIC RESPONSE OF MASONRY BUILDINGS

A masonry building's earthquake resistance has been described here as a function of wall layout, wall area, and wall strength. These characteristics are often sufficient. Enough wall area can often be provided so that even during a strong earthquake the building's walls remain basically elastic, without any yielding of reinforcement. However, architectural constraints may limit the wall area that can be provided.

Click here to read full article from Masonry Construction

Related Articles
- High Cement Content Problems Manlius NY
Portland cement gives a mortar added durability, high early strength, a consistent hardening rate, and high compressive and bond strengths. However, mortar with excessively high cement contents can affect water permeability and durability of the masonry.
- Flashing Factors Manlius NY
- Hand-Held Power Saws Manlius NY
- Grout Pumps Manlius NY
- Flashing at Sills Manlius NY
- Galvanized Wall Ties Manlius NY
- Graphisoft EcoDesigner Manlius NY
- Galvanized Wall Ties Manlius NY
- Inner Corner at Base of Wall Manlius NY
- Flue Liners for Masonry Chimneys Manlius NY