How Masonry Buildings Resist Earthquakes Holbrook NY

Because masonry buildings usually have many structural wall elements, they tend to be stiff laterally. Because masonry buildings in Holbrook are stiff laterally, even moderate earthquakes can subject them to large shear loads at their base.

Local Companies

Mastercraft Masonry I Inc
(718) 231-3077
271 E 233rd St
Bronx, NY
Zamboli Mason Inc
(631) 395-1900
581 Mastic Rd
Mastic, NY
Kelly Masonry Corp
(516) 739-8110
366 Sagamore Ave
Mineola, NY
Cobble King Inc
(631) 924-6202
530 North St
Manorville, NY
United Masonry Corp
(516) 799-0555
5648 Old Sunrise Hwy
Massapequa, NY
Manhattan Contracting Corp.
(631) 584-5155
34 East Main Street
Smithtown, NY
Yurewich Victor
(845) 354-1362
75 Wilder Rd
Suffern, NY
25 Mason Inc
(718) 832-2388
121 25th St
Brooklyn, NY
A & J Masonry Construction Corp
(718) 845-4507
9408 Albert Rd
Jamaica, NY
Henry Devries Inc
(845) 342-2148
558 County Route 49
Middletown, NY

Provided By:

Source: Masonry Construction
Publication date: January 1, 1990

By Richard E. Klingner

How vulnerable are masonry buildings to earthquakes? How can they be designed to resist earthquakes?

HOW MASONRY BUILDINGS RESPOND

Because masonry buildings usually have many structural wall elements, they tend to be stiff laterally. Because masonry buildings are stiff laterally, even moderate earthquakes can subject them to large shear loads at their base.

For a typical masonry building, these shear loads can be calculated in the following way: Base shear load= (building mass) x (earthquake ground acceleration) x (dynamic amplification factor).

MASONRY SEISMIC DESIGN

Though even moderate ground accelerations can subject masonry buildings to large shear loads, masonry buildings can still be designed to resist these loads. In general, the designer must estimate the lateral inertial forces acting on each element and provide for the transfer of these forces down to the foundation.

INELASTIC RESPONSE OF MASONRY BUILDINGS

A masonry building's earthquake resistance has been described here as a function of wall layout, wall area, and wall strength. These characteristics are often sufficient. Enough wall area can often be provided so that even during a strong earthquake the building's walls remain basically elastic, without any yielding of reinforcement. However, architectural constraints may limit the wall area that can be provided.

Click here to read full article from Masonry Construction

Related Articles