How Masonry Buildings Resist Earthquakes Babylon NY

Because masonry buildings usually have many structural wall elements, they tend to be stiff laterally. Because masonry buildings in Babylon are stiff laterally, even moderate earthquakes can subject them to large shear loads at their base.

Local Companies

NEW YORK CITY BEST CONSTRUCTION CORP.
347-26-9950
25 BEECHWOOD PLACE
Massapequa Park, NJ
De Ridder Masonry Inc
(518) 584-2666
59 Blanchard Rd
Gansevoort, NY
Doyner Inc
(315) 431-9841
6715 Joy Rd
East Syracuse, NY
Italia Pavers
(631) 419-0929
890 Montauk Hwy
Bayport, NY
Masonry Plus
(631) 728-5767
19 Landing Ln
East Quogue, NY
Manhattan Contracting Corp.
(631) 584-5155
34 East Main Street
Smithtown, NY
Granite Cement & Brick Masons Inc
(631) 669-0587
127 Cadman Ave
Babylon, NY
Hampton Brick Works
(631) 723-2821

Hampton Bays, NY
Williams Mark Mason
(518) 392-5385
49 White Mills Rd
Chatham, NY
Transcorp Construction Corp
(718) 639-1773
7416 Grand Ave
Elmhurst, NY
Data Provided by:
  

Provided By:

Source: Masonry Construction
Publication date: January 1, 1990

By Richard E. Klingner

How vulnerable are masonry buildings to earthquakes? How can they be designed to resist earthquakes?

HOW MASONRY BUILDINGS RESPOND

Because masonry buildings usually have many structural wall elements, they tend to be stiff laterally. Because masonry buildings are stiff laterally, even moderate earthquakes can subject them to large shear loads at their base.

For a typical masonry building, these shear loads can be calculated in the following way: Base shear load= (building mass) x (earthquake ground acceleration) x (dynamic amplification factor).

MASONRY SEISMIC DESIGN

Though even moderate ground accelerations can subject masonry buildings to large shear loads, masonry buildings can still be designed to resist these loads. In general, the designer must estimate the lateral inertial forces acting on each element and provide for the transfer of these forces down to the foundation.

INELASTIC RESPONSE OF MASONRY BUILDINGS

A masonry building's earthquake resistance has been described here as a function of wall layout, wall area, and wall strength. These characteristics are often sufficient. Enough wall area can often be provided so that even during a strong earthquake the building's walls remain basically elastic, without any yielding of reinforcement. However, architectural constraints may limit the wall area that can be provided.

Click here to read full article from Masonry Construction

Related Articles
- Hand-Held Power Saws Babylon NY
The WSR 1400-PE reciprocating saw features a smart power system that maintains blade speed under load and reduces cutting time. The saw is ergonomically designed with a vibration control, front hand grip, comfort side handle, and keyless blade clamp.
- Galvanized Wall Ties Babylon NY
- Flashing at Sills Babylon NY
- Galvanized Wall Ties Babylon NY
- Inner Corner at Base of Wall Babylon NY
- Graphisoft EcoDesigner Babylon NY
- High Cement Content Problems Babylon NY
- Flue Liners for Masonry Chimneys Babylon NY
- Grout Pumps Babylon NY
- Flashing Factors Babylon NY