Home Exterior Product Reviews Scarsdale NY

ShingleVent II-9 has a 9-inch exposure for use with cedar shake or enhanced ridge cap shingles on 3/12 to 12/12 roof pitches, and it features an external wind baffle that deflects wind up and over the ridge, creating low pressure above the vent openings on both sides to pull air evenly out of the attic.

Local Companies

Atria Builder
(212) 876-2756
330 E 109th St
New York, NY
new age roofing
718-626-0027
60-74 70 street
maspeth, NY
Great Neck Saw Manufacturers
(516) 746-5352
165 East Second Street
Mineola, NY
Gotham Builders
800-444-4923
203- 20 Rocky Hill Road
Bayside, NY
Above Remodeling Corporation
(212) 939-7571
295 Madison Avenue
New York, NY
Arcs Construction Service
(212) 722-2110
309 E 103rd St
New York, NY
B & B Construction
(212) 661-6008
420 Lexington Ave
New York, NY
Ivonne Ibarra
(212) 398-6881
108 W. 39th Street
New York, NY
Dennis Forte Construction, LLC
914-202-8720
53 Lispenard Ave.
Bronxville, NY
Van Go General Contracting
(201) 387-9013
326 So. Washington Ave
Bergenfield, NJ
Data Provided by:
  

Provided By:

By PRO SALES Staff

A Air Vent ShingleVent II-9 has a 9-inch exposure for use with cedar shake or enhanced ridge cap shingles on 3/12 to 12/12 roof pitches, and it features an external wind baffle that deflects wind up and over the ridge, creating low pressure above the vent openings on both sides to pull air evenly out of the attic. The baffle also deflects rain and snow while the internal weather filter provides a barrier against weather, dust, and insect invasion. 800.247.8368. www.airvent.com .

B TimberTech Featuring a skid-free, splinter-free surface that resists fading, weathering, rotting, and warping, DockSider composite planks are ideal for dock, marina, and boardwalk structures. The planks span 24 inches on-center and have a 1¼-inch-by-5½-inch square-edge profile that withstands exposure to moisture and heavy traffic. DockSider comes in 12-, 16-, and 20-foot lengths. 800.307.7780. www.timbertech.com .

C CertainTeed Triple 3 1/3-inch solid vinyl panels can be used for soffit where vented panels are not required, as well as for vertical siding applications. The panels feature a flat face design with a low-gloss matte finish to provide the look of painted wood. Sharp edges are formed by the deep dovetails between panel profiles and a ¾-inch projection creates sharp definition, the maker says. 800.233.8990. www.certainteed.com .

D Vinyl Visions Maximum Vinyl Products' Cambium vinyl fencing is c...

Click here to read full article from Pro Sales Magazine

Related Local Event
Long Island Building & Facility Maintenance Show
Dates: 5/5/09 - 5/8/20
Location: David S. Mack Sports & Exhibition Complex - Hofstra University
Hempstead, NY
View Details