Home Exterior Product Reviews Saratoga Springs NY

ShingleVent II-9 has a 9-inch exposure for use with cedar shake or enhanced ridge cap shingles on 3/12 to 12/12 roof pitches, and it features an external wind baffle that deflects wind up and over the ridge, creating low pressure above the vent openings on both sides to pull air evenly out of the attic.

Local Companies

Advanced Environmental Associates
(518)522-4406
2877 Rt.9
Malta, NY
Ethos Homes, LLC
518-275-5731
20 Jordan Ln
Glenville, NY
Mr Handyman
(518) 581-4010

Saratoga Springs, NY
Vindi Constr Inc
(631) 752-7424
242 Broadhollow Rd
Farmingdale, NY
Frontier Floor Sanding & Refinishing
(718) 987-4382
166 Twombly Ave
Staten Island, NY
Residential One, LLC
518-383-3199
207 Riverview Road
Rexford, NY
Aquaseal USA
(866)788-9283
117 Vosburgh Road
mechanicville, NY
Innovative Home Improvement of Saratoga Inc
(518) 583-0502
4289 Route 50
Saratoga Springs, NY
A A Paramount Full Svce Contracting Inc
(516) 466-9019
4004 249th St
Little Neck, NY
Proy R M Contractors
(716) 941-6807
8174 Cole Rd
Colden, NY

Provided By:

By PRO SALES Staff

A Air Vent ShingleVent II-9 has a 9-inch exposure for use with cedar shake or enhanced ridge cap shingles on 3/12 to 12/12 roof pitches, and it features an external wind baffle that deflects wind up and over the ridge, creating low pressure above the vent openings on both sides to pull air evenly out of the attic. The baffle also deflects rain and snow while the internal weather filter provides a barrier against weather, dust, and insect invasion. 800.247.8368. www.airvent.com .

B TimberTech Featuring a skid-free, splinter-free surface that resists fading, weathering, rotting, and warping, DockSider composite planks are ideal for dock, marina, and boardwalk structures. The planks span 24 inches on-center and have a 1¼-inch-by-5½-inch square-edge profile that withstands exposure to moisture and heavy traffic. DockSider comes in 12-, 16-, and 20-foot lengths. 800.307.7780. www.timbertech.com .

C CertainTeed Triple 3 1/3-inch solid vinyl panels can be used for soffit where vented panels are not required, as well as for vertical siding applications. The panels feature a flat face design with a low-gloss matte finish to provide the look of painted wood. Sharp edges are formed by the deep dovetails between panel profiles and a ¾-inch projection creates sharp definition, the maker says. 800.233.8990. www.certainteed.com .

D Vinyl Visions Maximum Vinyl Products' Cambium vinyl fencing is c...

Click here to read full article from Pro Sales Magazine