Home Exterior Product Reviews Rochester NY

ShingleVent II-9 has a 9-inch exposure for use with cedar shake or enhanced ridge cap shingles on 3/12 to 12/12 roof pitches, and it features an external wind baffle that deflects wind up and over the ridge, creating low pressure above the vent openings on both sides to pull air evenly out of the attic.

Local Companies

Professional Finishes
585-533-9140
28 academy dr.
rochester, NY
LM Sanderson Construction Inc.
585 370 6076
891 Dewitt rd.
Webster, NY
Twelve Corners Handyman & Remodeling Inc
(585) 271-8970
180 Boniface Dr
Rochester, NY
Vindi Constr Inc
(631) 752-7424
242 Broadhollow Rd
Farmingdale, NY
Frontier Floor Sanding & Refinishing
(718) 987-4382
166 Twombly Ave
Staten Island, NY
DJM Equipment
585-223-4056
7216 Palmyra Road
Fairport, NY
Stone Seal
585-637-6883
4929 sweden walker road
rochester, NY
CO9 STEEL
585 301 7724
310 angelus dr
ROCHESTER, NY
A A Paramount Full Svce Contracting Inc
(516) 466-9019
4004 249th St
Little Neck, NY
Proy R M Contractors
(716) 941-6807
8174 Cole Rd
Colden, NY

Provided By:

By PRO SALES Staff

A Air Vent ShingleVent II-9 has a 9-inch exposure for use with cedar shake or enhanced ridge cap shingles on 3/12 to 12/12 roof pitches, and it features an external wind baffle that deflects wind up and over the ridge, creating low pressure above the vent openings on both sides to pull air evenly out of the attic. The baffle also deflects rain and snow while the internal weather filter provides a barrier against weather, dust, and insect invasion. 800.247.8368. www.airvent.com .

B TimberTech Featuring a skid-free, splinter-free surface that resists fading, weathering, rotting, and warping, DockSider composite planks are ideal for dock, marina, and boardwalk structures. The planks span 24 inches on-center and have a 1¼-inch-by-5½-inch square-edge profile that withstands exposure to moisture and heavy traffic. DockSider comes in 12-, 16-, and 20-foot lengths. 800.307.7780. www.timbertech.com .

C CertainTeed Triple 3 1/3-inch solid vinyl panels can be used for soffit where vented panels are not required, as well as for vertical siding applications. The panels feature a flat face design with a low-gloss matte finish to provide the look of painted wood. Sharp edges are formed by the deep dovetails between panel profiles and a ¾-inch projection creates sharp definition, the maker says. 800.233.8990. www.certainteed.com .

D Vinyl Visions Maximum Vinyl Products' Cambium vinyl fencing is c...

Click here to read full article from Pro Sales Magazine