Home Exterior Product Reviews North Tonawanda NY

ShingleVent II-9 has a 9-inch exposure for use with cedar shake or enhanced ridge cap shingles on 3/12 to 12/12 roof pitches, and it features an external wind baffle that deflects wind up and over the ridge, creating low pressure above the vent openings on both sides to pull air evenly out of the attic.

Local Companies

Professional Tree Care, Inc.
716 681 9663
po box 344
lancaster, NY
Rayford Enterprises, Inc.
(716) 854-3331
281 Exchange St.
Buffalo, NY
L & L Electrical Construction Inc.
(716) 822-6362
3010 Whitehaven Rd.
Grand Island, NY
Holiday Lumber Co.
(716) 863-6338
22 Sussex Ln.
Lancaster, NY
General Welding & Fabricating, Inc.
(716) 652-0033
991 Maple Rd.
Elma, NY
Iroquois Bar Corp.
716-826-7814
155 Commerce Dr.
Lackawanna, NY
Glauber Equipment Corp.
(716) 681-1234
1600 Commerce Pkwy.
Lancaster, NY
National Grid
(800) 642-4272
144 Kensington Ave.
Buffalo, NY
Robert Miller Construction, Inc.
(716) 434-8807
PO Box 480
Lockport, NY
Sicar Management & Construction, Inc.
(716) 655-4601
1128 Jamison Rd.
Elma, NY

Provided By:

By PRO SALES Staff

A Air Vent ShingleVent II-9 has a 9-inch exposure for use with cedar shake or enhanced ridge cap shingles on 3/12 to 12/12 roof pitches, and it features an external wind baffle that deflects wind up and over the ridge, creating low pressure above the vent openings on both sides to pull air evenly out of the attic. The baffle also deflects rain and snow while the internal weather filter provides a barrier against weather, dust, and insect invasion. 800.247.8368. www.airvent.com .

B TimberTech Featuring a skid-free, splinter-free surface that resists fading, weathering, rotting, and warping, DockSider composite planks are ideal for dock, marina, and boardwalk structures. The planks span 24 inches on-center and have a 1¼-inch-by-5½-inch square-edge profile that withstands exposure to moisture and heavy traffic. DockSider comes in 12-, 16-, and 20-foot lengths. 800.307.7780. www.timbertech.com .

C CertainTeed Triple 3 1/3-inch solid vinyl panels can be used for soffit where vented panels are not required, as well as for vertical siding applications. The panels feature a flat face design with a low-gloss matte finish to provide the look of painted wood. Sharp edges are formed by the deep dovetails between panel profiles and a ¾-inch projection creates sharp definition, the maker says. 800.233.8990. www.certainteed.com .

D Vinyl Visions Maximum Vinyl Products' Cambium vinyl fencing is c...

Click here to read full article from Pro Sales Magazine