Home Exterior Product Reviews Ithaca NY

ShingleVent II-9 has a 9-inch exposure for use with cedar shake or enhanced ridge cap shingles on 3/12 to 12/12 roof pitches, and it features an external wind baffle that deflects wind up and over the ridge, creating low pressure above the vent openings on both sides to pull air evenly out of the attic.

Local Companies

Premier Remodelers & Builders Inc
(607) 272-2820
712 W Court St
Ithaca, NY
O'connor S Painting
(607) 277-5667
417 N Geneva St
Ithaca, NY
B & A Home Improvement
(631) 207-1328
111 Traction Blvd
Patchogue, NY
Islander Home Improvements Inc
(516) 579-5200
14 Silversmith Ln
Levittown, NY
Artisan Interiors
(516) 921-2980
55 Jackson Ave
Syosset, NY
Airtight Spray Foam
607-387-5688
50 South Street
Trumansburg, NY
Wallenbeck Painting & Staining
(607) 277-6249
5 Maxs Dr
Ithaca, NY
Gene Magistro Home Improvements Inc
(516) 694-3531
720 Main St
Farmingdale, NY
Fabian Construction Co Inc
(718) 894-9200
5905 59th Dr
Maspeth, NY
M I Boc Home Improvement
(631) 476-5400
1085 Route 112
Port Jefferson Station, NY

Provided By:

By PRO SALES Staff

A Air Vent ShingleVent II-9 has a 9-inch exposure for use with cedar shake or enhanced ridge cap shingles on 3/12 to 12/12 roof pitches, and it features an external wind baffle that deflects wind up and over the ridge, creating low pressure above the vent openings on both sides to pull air evenly out of the attic. The baffle also deflects rain and snow while the internal weather filter provides a barrier against weather, dust, and insect invasion. 800.247.8368. www.airvent.com .

B TimberTech Featuring a skid-free, splinter-free surface that resists fading, weathering, rotting, and warping, DockSider composite planks are ideal for dock, marina, and boardwalk structures. The planks span 24 inches on-center and have a 1¼-inch-by-5½-inch square-edge profile that withstands exposure to moisture and heavy traffic. DockSider comes in 12-, 16-, and 20-foot lengths. 800.307.7780. www.timbertech.com .

C CertainTeed Triple 3 1/3-inch solid vinyl panels can be used for soffit where vented panels are not required, as well as for vertical siding applications. The panels feature a flat face design with a low-gloss matte finish to provide the look of painted wood. Sharp edges are formed by the deep dovetails between panel profiles and a ¾-inch projection creates sharp definition, the maker says. 800.233.8990. www.certainteed.com .

D Vinyl Visions Maximum Vinyl Products' Cambium vinyl fencing is c...

Click here to read full article from Pro Sales Magazine