Home Exterior Product Reviews Glens Falls NY

ShingleVent II-9 has a 9-inch exposure for use with cedar shake or enhanced ridge cap shingles on 3/12 to 12/12 roof pitches, and it features an external wind baffle that deflects wind up and over the ridge, creating low pressure above the vent openings on both sides to pull air evenly out of the attic.

Local Companies

All-Rite Remodeling Svce
(718) 617-7150
1352 Metcalf Ave
Bronx, NY
Countryman Home Improvements
(845) 988-5029
10 Poplar St
Warwick, NY
Herbster James E Constr Co the
(914) 967-6955
5 Mayfield St
Rye, NY
Shaira Construction
(212) 260-6622
636 Broadway
New York, NY
Hansen Home Design
(516) 541-2618
1236 Lakeshore Dr
Massapequa Park, NY
Jim's Roofing
(518) 793-0290
Feld Ave
Glens Falls, NY
Dave's Home Improvements
(516) 872-1226
232 W Valley Stream Blvd
Valley Stream, NY
Fairway Construction Inc
(716) 853-0966
212 Ohio St
Buffalo, NY
Dun-Rite Home Improvements
(631) 473-6062
192 Pipe Stave Hollow Rd
Mount Sinai, NY
Rincon Hispano
(607) 753-6202
136 Main St
Cortland, NY

Provided By:

By PRO SALES Staff

A Air Vent ShingleVent II-9 has a 9-inch exposure for use with cedar shake or enhanced ridge cap shingles on 3/12 to 12/12 roof pitches, and it features an external wind baffle that deflects wind up and over the ridge, creating low pressure above the vent openings on both sides to pull air evenly out of the attic. The baffle also deflects rain and snow while the internal weather filter provides a barrier against weather, dust, and insect invasion. 800.247.8368. www.airvent.com .

B TimberTech Featuring a skid-free, splinter-free surface that resists fading, weathering, rotting, and warping, DockSider composite planks are ideal for dock, marina, and boardwalk structures. The planks span 24 inches on-center and have a 1¼-inch-by-5½-inch square-edge profile that withstands exposure to moisture and heavy traffic. DockSider comes in 12-, 16-, and 20-foot lengths. 800.307.7780. www.timbertech.com .

C CertainTeed Triple 3 1/3-inch solid vinyl panels can be used for soffit where vented panels are not required, as well as for vertical siding applications. The panels feature a flat face design with a low-gloss matte finish to provide the look of painted wood. Sharp edges are formed by the deep dovetails between panel profiles and a ¾-inch projection creates sharp definition, the maker says. 800.233.8990. www.certainteed.com .

D Vinyl Visions Maximum Vinyl Products' Cambium vinyl fencing is c...

Click here to read full article from Pro Sales Magazine