Home Exterior Product Reviews East Syracuse NY

ShingleVent II-9 has a 9-inch exposure for use with cedar shake or enhanced ridge cap shingles on 3/12 to 12/12 roof pitches, and it features an external wind baffle that deflects wind up and over the ridge, creating low pressure above the vent openings on both sides to pull air evenly out of the attic.

Local Companies

J.P. Megnin General Contracting
(315)391-1383
938 Cty Rt 11
West Monroe, NY
Ryan Heneka's Decorative Concrete
315.506.0336
105 Melvin Avenue
Liverpool, NY
New Heritage Woodworking
315-677-3884
7022 Bush Road
Jamesville, NY
Hess Corporation
(315) 234-5330
100 Clinton Sq.
Syracuse, NY
Tools of the Trade Construction Corp
(718) 982-8383
96 Arthur Ave
Staten Island, NY
Nu-Crete
315-720-6599
P.O. Box 145
Baldwinsville, NY
Distinctive Innovations, Inc.
315-696-6672
9 Clinton St.
Tully, NY
Expert Chimney Services, Inc
315 469 5004
4800 McDonald Rd
Syracuse, NY
Oneida Valley Abstract Corp.
(315) 363-1444
PO box 296
Wampsville, NY
Merrimac Home Contracting Co
(315) 437-0839
PO Box 535
East Syracuse, NY

Provided By:

By PRO SALES Staff

A Air Vent ShingleVent II-9 has a 9-inch exposure for use with cedar shake or enhanced ridge cap shingles on 3/12 to 12/12 roof pitches, and it features an external wind baffle that deflects wind up and over the ridge, creating low pressure above the vent openings on both sides to pull air evenly out of the attic. The baffle also deflects rain and snow while the internal weather filter provides a barrier against weather, dust, and insect invasion. 800.247.8368. www.airvent.com .

B TimberTech Featuring a skid-free, splinter-free surface that resists fading, weathering, rotting, and warping, DockSider composite planks are ideal for dock, marina, and boardwalk structures. The planks span 24 inches on-center and have a 1¼-inch-by-5½-inch square-edge profile that withstands exposure to moisture and heavy traffic. DockSider comes in 12-, 16-, and 20-foot lengths. 800.307.7780. www.timbertech.com .

C CertainTeed Triple 3 1/3-inch solid vinyl panels can be used for soffit where vented panels are not required, as well as for vertical siding applications. The panels feature a flat face design with a low-gloss matte finish to provide the look of painted wood. Sharp edges are formed by the deep dovetails between panel profiles and a ¾-inch projection creates sharp definition, the maker says. 800.233.8990. www.certainteed.com .

D Vinyl Visions Maximum Vinyl Products' Cambium vinyl fencing is c...

Click here to read full article from Pro Sales Magazine