Home Exterior Product Reviews East Amherst NY

ShingleVent II-9 has a 9-inch exposure for use with cedar shake or enhanced ridge cap shingles on 3/12 to 12/12 roof pitches, and it features an external wind baffle that deflects wind up and over the ridge, creating low pressure above the vent openings on both sides to pull air evenly out of the attic.

Local Companies

Kingsberry Construction
1(888)502-0014
Main St.
Buffalo, NY
U*C Coatings Corporation
(716) 833-9366
2250 Fillmore Ave.
Buffalo, NY
Ferguson Electric Construction Co., Inc.
(716) 852-2010
333 Ellicott St.
Buffalo, NY
Geiger Bros. Construction
(716) 837-7848
33 Claremont Ave.
Buffalo, NY
General Welding & Fabricating, Inc.
(716) 652-0033
991 Maple Rd.
Elma, NY
Iroquois Bar Corp.
716-826-7814
155 Commerce Dr.
Lackawanna, NY
Unifrax 1 LLC
(716) 278-3843
2351 Whirlpool St.
Niagara Falls, NY
NYSEG
(716) 681-5030
150 Erie St.
Lancaster, NY
National Fuel Gas Distribution Corporation
(716) 857-7000
6363 Main St.
Williamsville, NY
Highland Masonry Restoration, Inc.
(716) 712-0781
33 Ransier Dr.
West Seneca, NY

Provided By:

By PRO SALES Staff

A Air Vent ShingleVent II-9 has a 9-inch exposure for use with cedar shake or enhanced ridge cap shingles on 3/12 to 12/12 roof pitches, and it features an external wind baffle that deflects wind up and over the ridge, creating low pressure above the vent openings on both sides to pull air evenly out of the attic. The baffle also deflects rain and snow while the internal weather filter provides a barrier against weather, dust, and insect invasion. 800.247.8368. www.airvent.com .

B TimberTech Featuring a skid-free, splinter-free surface that resists fading, weathering, rotting, and warping, DockSider composite planks are ideal for dock, marina, and boardwalk structures. The planks span 24 inches on-center and have a 1¼-inch-by-5½-inch square-edge profile that withstands exposure to moisture and heavy traffic. DockSider comes in 12-, 16-, and 20-foot lengths. 800.307.7780. www.timbertech.com .

C CertainTeed Triple 3 1/3-inch solid vinyl panels can be used for soffit where vented panels are not required, as well as for vertical siding applications. The panels feature a flat face design with a low-gloss matte finish to provide the look of painted wood. Sharp edges are formed by the deep dovetails between panel profiles and a ¾-inch projection creates sharp definition, the maker says. 800.233.8990. www.certainteed.com .

D Vinyl Visions Maximum Vinyl Products' Cambium vinyl fencing is c...

Click here to read full article from Pro Sales Magazine