Home Exterior Product Reviews Delmar NY

ShingleVent II-9 has a 9-inch exposure for use with cedar shake or enhanced ridge cap shingles on 3/12 to 12/12 roof pitches, and it features an external wind baffle that deflects wind up and over the ridge, creating low pressure above the vent openings on both sides to pull air evenly out of the attic.

Local Companies

ACE Line Striping
518-785-0096
PO Box
East Greenbush, NY
Con-Tech Construction
(518) 479-4437
102 Washington Ave
Albany, NY
S & H Contractors Inc
(315) 568-2415
142 E Bayard St
Seneca Falls, NY
Utica's Pink Panther Painting & Home Improvements
(315) 797-0638

Utica, NY
A S Hill Contracting
(845) 758-5497

Red Hook, NY
Residential One, LLC
518-383-3199
207 Riverview Road
Rexford, NY
Ethos Homes, LLC
518-275-5731
20 Jordan Ln
Glenville, NY
King Brothers Building & Remodeling Inc
(518) 475-1442
60 Union Ave
Delmar, NY
Mpw Contracting Inc
(315) 478-6542
2001 Teall Ave
Syracuse, NY
Aboff's Paint & Wallcovering
(516) 766-2211
289 Sunrise Hwy
Rockville Centre, NY

Provided By:

By PRO SALES Staff

A Air Vent ShingleVent II-9 has a 9-inch exposure for use with cedar shake or enhanced ridge cap shingles on 3/12 to 12/12 roof pitches, and it features an external wind baffle that deflects wind up and over the ridge, creating low pressure above the vent openings on both sides to pull air evenly out of the attic. The baffle also deflects rain and snow while the internal weather filter provides a barrier against weather, dust, and insect invasion. 800.247.8368. www.airvent.com .

B TimberTech Featuring a skid-free, splinter-free surface that resists fading, weathering, rotting, and warping, DockSider composite planks are ideal for dock, marina, and boardwalk structures. The planks span 24 inches on-center and have a 1¼-inch-by-5½-inch square-edge profile that withstands exposure to moisture and heavy traffic. DockSider comes in 12-, 16-, and 20-foot lengths. 800.307.7780. www.timbertech.com .

C CertainTeed Triple 3 1/3-inch solid vinyl panels can be used for soffit where vented panels are not required, as well as for vertical siding applications. The panels feature a flat face design with a low-gloss matte finish to provide the look of painted wood. Sharp edges are formed by the deep dovetails between panel profiles and a ¾-inch projection creates sharp definition, the maker says. 800.233.8990. www.certainteed.com .

D Vinyl Visions Maximum Vinyl Products' Cambium vinyl fencing is c...

Click here to read full article from Pro Sales Magazine