Home Exterior Product Reviews Beacon NY

ShingleVent II-9 has a 9-inch exposure for use with cedar shake or enhanced ridge cap shingles on 3/12 to 12/12 roof pitches, and it features an external wind baffle that deflects wind up and over the ridge, creating low pressure above the vent openings on both sides to pull air evenly out of the attic.

Local Companies

New York State Construction
(845) 641-3382
7 Skyline Dr
Thiells, NY
mv custom inc mvcustominc.com
845 226-2375
803 beekman road
hopewell jct, NY
Alfandre Architecture, PC
(845) 255-4774
7 Innis Avenue
New Paltz, NY
Jim Whitney Home Improvements
(845) 255-2773
75 Dug Rd.
New Paltz, NY
Wish You Wood,Inc.
845-787-3600
19 hudson terrace
Marlboro, NY
ilias painting and paper hanging inc
845-282-9066
53 rodeo dr
hopewell jct, NY
MV custom inc
845 2262375
803 beekman road
hopewell jct, NY
jmc:contracting work corp
1914 672 7119
627 highland ave
peekskill, NY
Water Solutions of New Paltz, Inc.
(845) 255-3408
PO Box 221
New Paltz, NY
Living Art Landscapes Inc.
(845) 691-8992
428 N. Riverside Rd
Highland, NY

Provided By:

By PRO SALES Staff

A Air Vent ShingleVent II-9 has a 9-inch exposure for use with cedar shake or enhanced ridge cap shingles on 3/12 to 12/12 roof pitches, and it features an external wind baffle that deflects wind up and over the ridge, creating low pressure above the vent openings on both sides to pull air evenly out of the attic. The baffle also deflects rain and snow while the internal weather filter provides a barrier against weather, dust, and insect invasion. 800.247.8368. www.airvent.com .

B TimberTech Featuring a skid-free, splinter-free surface that resists fading, weathering, rotting, and warping, DockSider composite planks are ideal for dock, marina, and boardwalk structures. The planks span 24 inches on-center and have a 1¼-inch-by-5½-inch square-edge profile that withstands exposure to moisture and heavy traffic. DockSider comes in 12-, 16-, and 20-foot lengths. 800.307.7780. www.timbertech.com .

C CertainTeed Triple 3 1/3-inch solid vinyl panels can be used for soffit where vented panels are not required, as well as for vertical siding applications. The panels feature a flat face design with a low-gloss matte finish to provide the look of painted wood. Sharp edges are formed by the deep dovetails between panel profiles and a ¾-inch projection creates sharp definition, the maker says. 800.233.8990. www.certainteed.com .

D Vinyl Visions Maximum Vinyl Products' Cambium vinyl fencing is c...

Click here to read full article from Pro Sales Magazine

Related Articles