Home Comfort Zones System Port Jefferson Station NY

Almost like clockwork, each spring and fall, homeowners living in houses with forced-air HVAC systems in Port Jefferson Station must adjust the dampers in the ductwork in an often vain attempt to balance the temperature from floor to floor and room to room. It is an inexact science, to say the least.

Local Companies

Fal-Ken Heating & Cooling Corp
631-589-5881
776 Montauk Hwy
Bayport, NY
Anderson Air LLC
631-657-6230
24 Eastport Manor Road
Eastport, NY
Danisi Fuel Co Inc
631-732-6666
3205 Rte 112
Medford, NY
Best Temp Central A/C & Heat Corp
631-266-5968
94 Bellport Ave
Yaphank, NY
Soundview Heating & A/C Corp
631-209-1744
585-8 North Bicycle Path
Port Jefferson Station, NY
Connecticut Basement Systems Radon
800-319-8867
720 Woodend Road
Stratford, CT
The Cooling Company Inc
631-563-7196
1230 Ocean Ave
Bohemia, NY
Cool Power LLC
631-231-0002
10 Newton Pl
Hauppauge, NY
Engelmann Enterprises Inc
631-754-2222
345 Fort Salonga
Northport, NY
Hagen & Hansen Inc
631-269-2700
278 Indian Head Rd
Kings Park, NY

Provided By:

Source: BIG BUILDER Magazine
Publication date: October 1, 2006

By William Gloede

Almost like clockwork, each spring and fall, homeowners living in houses with forced-air HVAC systems must adjust the dampers in the ductwork in an often vain attempt to balance the temperature from floor to floor and room to room. It is an inexact science, to say the least.

In an attempt to achieve balance and flexibility in larger homes, builders routinely install a second HVAC. But even that is subject to the vagaries of weather and the orientation of the house relative to the sun.

To date, HVAC systems have mostly relied on heft to deal with temperature imbalance. But this leads to the expenditure of more energy than is necessary and more money on more BTU-power than required. Most forced-air systems rely on one or two hall-mounted thermostats to control temperature. They don't help much when the bathroom is cold in the winter and hot in the summer.

Home Comfort Zones, based in Beaverton, Ore., has come up with a simple, relatively inexpensive solution to this problem with its Home Comfort Zones system. It is a pneumatic network of specially designed balloons that are installed in the ductwork near air outlets in every room. The balloons expand and contract via a wireless signal transmitted by a temperature sensor installed on the wall or simply placed on a stand in each room. The whole system is controlled by a central keypad installed where a traditional thermostat would go.

Click here to read full article from Big Builder