Home Comfort Zones System Brooklyn NY

Almost like clockwork, each spring and fall, homeowners living in houses with forced-air HVAC systems in Brooklyn must adjust the dampers in the ductwork in an often vain attempt to balance the temperature from floor to floor and room to room. It is an inexact science, to say the least.

Local Companies

Harry & Sons Air Conditioning And Heating Llc
(201) 669-8802
274 County Rd.
Tenfly, NJ
Queens, Brooklyn, Bronx Appliance, Air Conditioning And Heating Repair
800-397-9107
15715 72Nd Ave.
Flushing, NY
Lou Severino A/C & Refrigeration
201-488-3449
203 W Shore Ave
Bogota, NJ
G C Reliable Service Inc
914-633-3535
80 Grove Ave
New Rochelle, NY
Al's Heating and Air Inc
(516) 535-9424
28-05 172 st
Flushing, NY
Adriatic Aire Llc
(973) 249-8066
1093 Po Box
Clifton, NJ
Pm Mechanical Services
917-482-3954
337 Houston Stree
New Yor, NY
Century Htg & Clg Inc
973-667-6422
173 Centre St
Nutley, NJ
Diamond HVAC-R Inc
201-330-7690
4316 Liberty Ave
North Bergen, NJ
Jim Hall Heating & A/C
718-948-2456
111 E Storer Ave
Staten Island, NY
Data Provided by:
  

Provided By:

Source: BIG BUILDER Magazine
Publication date: October 1, 2006

By William Gloede

Almost like clockwork, each spring and fall, homeowners living in houses with forced-air HVAC systems must adjust the dampers in the ductwork in an often vain attempt to balance the temperature from floor to floor and room to room. It is an inexact science, to say the least.

In an attempt to achieve balance and flexibility in larger homes, builders routinely install a second HVAC. But even that is subject to the vagaries of weather and the orientation of the house relative to the sun.

To date, HVAC systems have mostly relied on heft to deal with temperature imbalance. But this leads to the expenditure of more energy than is necessary and more money on more BTU-power than required. Most forced-air systems rely on one or two hall-mounted thermostats to control temperature. They don't help much when the bathroom is cold in the winter and hot in the summer.

Home Comfort Zones, based in Beaverton, Ore., has come up with a simple, relatively inexpensive solution to this problem with its Home Comfort Zones system. It is a pneumatic network of specially designed balloons that are installed in the ductwork near air outlets in every room. The balloons expand and contract via a wireless signal transmitted by a temperature sensor installed on the wall or simply placed on a stand in each room. The whole system is controlled by a central keypad installed where a traditional thermostat would go.

Click here to read full article from Big Builder