High Cement Content Problems Woodside NY

Portland cement gives a mortar added durability, high early strength, a consistent hardening rate, and high compressive and bond strengths. However, mortar with excessively high cement contents can affect water permeability and durability of the masonry.

Local Companies

S & A Contractors
(908) 354-9557
207 Shelley Ave
Elizabeth, NJ
Willow Run Construction
(201) 659-7266
67 Pollock Ave
Jersey City, NJ
Villa Stucco
(201) 653-9447
54 Jefferson Ave
Jersey City, NJ
Mr B Home Repairs
(718) 206-4900
10640 Guy R Brewer Blvd
Jamaica, NY
TONYS MASONRY
(917) 402-5202
262 wilson avenue
staten island, NY
E C Hufnagel Landscaping Inc
(201) 869-5680
51 Broad Ave Apt 1
Fairview, NJ
Ugolini Elio Mason Contractor
(201) 433-4304
213 Harrison Ave
Jersey City, NJ
Willow Snow Removal
(201) 659-7266
67 Pollock Ave
Jersey City, NJ
Jameson Mark
(201) 386-1500
Hoboken Area
Jersey City, NJ
Franklin Stucco Of Jamaica Inc
(718) 523-0099
14815 Liberty Ave
Jamaica, NY

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: December 1, 1990


Portland cement gives a mortar added durability, high early strength, a consistent hardening rate, and high compressive and bond strengths. However, mortar with excessively high cement contents can affect water permeability and durability of the masonry. Water permeability is increased for three reasons. First, mortars with high cement content have greater shrinkage and more frequent shrinkage cracks. Shrinkage cracking often takes the form of evenly spaced vertical cracks in bed joints and evenly spaced horizontal cracks in head joints. The mortar may also separate or pull away from the body of the brick at the bond interface. Although high cement content mortar itself is less permeable, water can penetrate the shrinkage cracks. The second reason that high cement content mortars may increase water permeance is that these mortars are stiff and not easily workable. Because of this, good bond may not be achieved at the time of construction. Finally, the high strength (high cement content) mortars are hard (brittle) and don't easily accommodate movement of the masonry (due to environmental changes or foundation settlement) and therefore may result in cracking of the masonry wall. Cracks make the walls more susceptible to freeze-thaw deterioration even though hi...

Click here to read full article from Masonry Construction