High Cement Content Problems Monsey NY

Portland cement gives a mortar added durability, high early strength, a consistent hardening rate, and high compressive and bond strengths. However, mortar with excessively high cement contents can affect water permeability and durability of the masonry.

Local Companies

park place pavers
(914)667-1735
255 rich ave
mount vernon, NY
315 W 35 Associates
(212) 594-1668
315 W 30th St
New York, NY
Lowes Home Improvement Warehouse of Ulster
(845) 382-6000
901 Frank Sottile Blvd
Kingston, NY
Smith's True Value Hardware Lumber and Gifts
(716) 934-4238
Routes 5 & 20
Irving, NY
Bath Fitter
(631) 789-9507
55 Albany Ave
Amityville, NY
K B Masonry LLC
(973) 831-0018
58 Townsend Road
Wanaque, NJ
Petson Building Supply Inc
(914) 576-5100
39 Birch St
New Rochelle, NY
Vinyl Deck & Dock Distributors
(518) 377-0374
1563 State St
Schenectady, NY
Zamir Equities
(212) 269-7553
40 Broad St
New York, NY
Atlantic Coating Inc
(631) 259-2401
360 Magee St
Southampton, NY

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: December 1, 1990


Portland cement gives a mortar added durability, high early strength, a consistent hardening rate, and high compressive and bond strengths. However, mortar with excessively high cement contents can affect water permeability and durability of the masonry. Water permeability is increased for three reasons. First, mortars with high cement content have greater shrinkage and more frequent shrinkage cracks. Shrinkage cracking often takes the form of evenly spaced vertical cracks in bed joints and evenly spaced horizontal cracks in head joints. The mortar may also separate or pull away from the body of the brick at the bond interface. Although high cement content mortar itself is less permeable, water can penetrate the shrinkage cracks. The second reason that high cement content mortars may increase water permeance is that these mortars are stiff and not easily workable. Because of this, good bond may not be achieved at the time of construction. Finally, the high strength (high cement content) mortars are hard (brittle) and don't easily accommodate movement of the masonry (due to environmental changes or foundation settlement) and therefore may result in cracking of the masonry wall. Cracks make the walls more susceptible to freeze-thaw deterioration even though hi...

Click here to read full article from Masonry Construction

Related Articles
- Flue Liners for Masonry Chimneys Monsey NY
Building codes require that residential masonry chimneys with walls thinner than 8 inches (nominal) be lined with a fire clay flue lining, fire clay brick, or a material that resists corrosion, softening, and cracking from flue gases as hot as 1,800 degrees Fahrenheit.
- Energy-Efficient Product Reviews Monsey NY
- Home Siding Tips Monsey NY
- Handling Siding Materials Monsey NY
- Eliminating Swirls in Precast Panels Monsey NY
- Incorrect Testing Practices Monsey NY
- Flashing in Siding Installations Monsey NY
- Galvanized Wall Ties Monsey NY
- Galvanized Wall Ties Monsey NY
- Fibers for Permeability Monsey NY