High Cement Content Problems Glen Oaks NY

Portland cement gives a mortar added durability, high early strength, a consistent hardening rate, and high compressive and bond strengths. However, mortar with excessively high cement contents can affect water permeability and durability of the masonry.

Local Companies

E C Hufnagel Landscaping Inc
(201) 869-5680
51 Broad Ave Apt 1
Fairview, NJ
Albanese J Construction Co Inc
(201) 659-6165
123 Oakland Ave
Jersey City, NJ
Clean Flow
(732) 985-1934
53 Bartha Ave
Jersey City, NJ
Alpha Design Corp
(718) 291-5023
17605 Linden Blvd
Jamaica, NY
park place pavers
(914)667-1735
255 rich ave
mount vernon, NY
Begolli Brother Construction and Restoration
(516) 476-6166
134 maple avenue
westbury, NY
SLR Industries Inc.
631 893 3934
411 Broadway
West Babylon, NY
Jetco Unlimited Exterior Building Restoration & Maintenance
(201) 798-3178
268 New York Ave
Jersey City, NJ
Jameson Mark
(201) 386-1500
Hoboken Area
Jersey City, NJ
Agl Land Design Inc
(631) 673-2854
19 Duncan Ln
Huntington, NY

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: December 1, 1990


Portland cement gives a mortar added durability, high early strength, a consistent hardening rate, and high compressive and bond strengths. However, mortar with excessively high cement contents can affect water permeability and durability of the masonry. Water permeability is increased for three reasons. First, mortars with high cement content have greater shrinkage and more frequent shrinkage cracks. Shrinkage cracking often takes the form of evenly spaced vertical cracks in bed joints and evenly spaced horizontal cracks in head joints. The mortar may also separate or pull away from the body of the brick at the bond interface. Although high cement content mortar itself is less permeable, water can penetrate the shrinkage cracks. The second reason that high cement content mortars may increase water permeance is that these mortars are stiff and not easily workable. Because of this, good bond may not be achieved at the time of construction. Finally, the high strength (high cement content) mortars are hard (brittle) and don't easily accommodate movement of the masonry (due to environmental changes or foundation settlement) and therefore may result in cracking of the masonry wall. Cracks make the walls more susceptible to freeze-thaw deterioration even though hi...

Click here to read full article from Masonry Construction

Related Articles
- Fibers for Permeability Glen Oaks NY
Permeability is defined as the property that governs the rate of fluid flow through a porous solid (Ref. 1). The porosity of cement paste determines the permeability of concrete (Ref. 2). The water-cement ratio is one of the largest contributors to porosity development, but, on the whole, porosity is determined through chemical interaction.
- Flue Liners for Masonry Chimneys Glen Oaks NY
- Incorrect Testing Practices Glen Oaks NY
- Eliminating Swirls in Precast Panels Glen Oaks NY
- Flashing in Siding Installations Glen Oaks NY
- Galvanized Wall Ties Glen Oaks NY
- Energy-Efficient Product Reviews Glen Oaks NY
- Galvanized Wall Ties Glen Oaks NY
- Handling Siding Materials Glen Oaks NY
- Home Siding Tips Glen Oaks NY