High Cement Content Problems Corning NY

Portland cement gives a mortar added durability, high early strength, a consistent hardening rate, and high compressive and bond strengths. However, mortar with excessively high cement contents can affect water permeability and durability of the masonry.

Local Companies

S & H Sales & Home Improvement
(315) 769-2167
543 S Main St Ste 1
Massena, NY
Lowes Home Improvement Warehouse of Poughkeepsie
(845) 298-4720
790 South Rd
Poughkeepsie, NY
Williams Lumber & Home Centers
(518) 851-3641
3679 Route 9
Greenport, NY
Grey Goose Doors
(516) 542-2390
9 S Broadway
Tarrytown, NY
Morristown Fuel & Supply Co Inc
(315) 375-6327
501 Chapman
Morristown, NY
Hephaistos Building Supplies Inc
(718) 784-7454
3701 24th St
Long Island City, NY
Lowy Lawrence Assocs Inc
(212) 889-5944
137 E 25th St
New York, NY
Pickett Building Materials
(607) 432-8391
6459 State Highway 23
Oneonta, NY
C & S Bldg Materials Inc
(518) 782-0078
25 Avis Dr
Latham, NY
National Roofing Supplies Inc
(631) 475-5215
470 W Main St
Patchogue, NY

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: December 1, 1990


Portland cement gives a mortar added durability, high early strength, a consistent hardening rate, and high compressive and bond strengths. However, mortar with excessively high cement contents can affect water permeability and durability of the masonry. Water permeability is increased for three reasons. First, mortars with high cement content have greater shrinkage and more frequent shrinkage cracks. Shrinkage cracking often takes the form of evenly spaced vertical cracks in bed joints and evenly spaced horizontal cracks in head joints. The mortar may also separate or pull away from the body of the brick at the bond interface. Although high cement content mortar itself is less permeable, water can penetrate the shrinkage cracks. The second reason that high cement content mortars may increase water permeance is that these mortars are stiff and not easily workable. Because of this, good bond may not be achieved at the time of construction. Finally, the high strength (high cement content) mortars are hard (brittle) and don't easily accommodate movement of the masonry (due to environmental changes or foundation settlement) and therefore may result in cracking of the masonry wall. Cracks make the walls more susceptible to freeze-thaw deterioration even though hi...

Click here to read full article from Masonry Construction

Related Articles