High-Build Coatings Woodside NY

High-build coatings are much more than paint over concrete block or other concrete surfaces in Woodside. They are high-tech products characterized by properties such as resistance to wind-driven rain, chalking and checking after weathering, high ultimate (breaking) elongation, elongation recovery and crack bridging capability, and water vapor permeability.

Local Companies

S & A Contractors
(908) 354-9557
207 Shelley Ave
Elizabeth, NJ
Ugolini Elio Mason Contractor
(201) 433-4304
213 Harrison Ave
Jersey City, NJ
Samson Stone Co Inc
(201) 656-2417
1000 Newark Ave
Jersey City, NJ
Malatesta Paladino Inc
(718) 523-5656
13919 109th Ave
Jamaica, NY
park place pavers
(914)667-1735
255 rich ave
mount vernon, NY
E C Hufnagel Landscaping Inc
(201) 869-5680
51 Broad Ave Apt 1
Fairview, NJ
Rapid Masonry Restoration
(718) 424-8304
7906 37th Ave
Jackson Heights, NY
Jetco Unlimited Exterior Building Restoration & Maintenance
(201) 798-3178
268 New York Ave
Jersey City, NJ
A La Marca Construction
(718) 526-7795
14402 91st Ave
Jamaica, NY
Franklin Stucco Of Jamaica Inc
(718) 523-0099
14815 Liberty Ave
Jamaica, NY

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: May 1, 2007

By Lorella Angelini

High-build coatings are much more than paint over concrete block or other concrete surfaces. They are high-tech products characterized by properties such as resistance to wind-driven rain, chalking and checking after weathering, high ultimate (breaking) elongation, elongation recovery and crack bridging capability, and water vapor permeability.

This article focuses on the benefits in using high-build coatings as surface treatments over concrete, points out their unique performance properties, and explains applicable ASTM test methods.

Coatings vs. paints
Graph illustrates the relationship between temperature and thickness, with the thin elastomeric coating breaking at the maximum crack extension in cold temperatures.

At a glance, acrylic high-build coatings are often mistaken for ordinary paints. They come in a pail, are applied on the wall by roll or spray, and are available in a variety of colors, either directly from the factory or tinted at the local distributor. However, the similarities end here.

High-build coatings are generally applied in one or two coats to a total dry film of 10 mils to 15 mils, while ordinary paints have average thicknesses from 3 mils to 5 mils. The difference in thickness is directly related to the viscosity of the two materials and their percent of solids. High-build coatings contain about 50% solids by volume, versus 30% for ordinary products.

Click here to read full article from Masonry Construction

Related Articles
- Home Improvement Marketing Woodside NY
The Internet has become a primary resource for consumers considering home improvements. If you don't have a Web site, consumers can't find you. Furthermore, for that Web site to generate leads, it must be visible to search engines such as Google, Yahoo, MSN, etc.
- High Cement Content Problems Woodside NY
- Hidden Decking Fasteners Woodside NY
- Entryway Doors Woodside NY
- Dry Window Products Woodside NY
- Easy SATA Woodside NY
- Form-Release Agents Woodside NY
- Exterior Products Woodside NY
- Framing a Pergola Woodside NY
- Green and Healthy Products Woodside NY