High-Build Coatings Spencerport NY

High-build coatings are much more than paint over concrete block or other concrete surfaces in Spencerport. They are high-tech products characterized by properties such as resistance to wind-driven rain, chalking and checking after weathering, high ultimate (breaking) elongation, elongation recovery and crack bridging capability, and water vapor permeability.

Local Companies

Agr Windows Inc
(212) 942-1249
4848 Broadway Apt 4A
New York, NY
Curtis Lumber Co Inc
(518) 439-9968
11 Grove St
Delmar, NY
Home Depot Inc
(845) 485-0420
3470 North Rd
Poughkeepsie, NY
Williamson Building Supply Llc
(315) 589-4221
4004 Railroad Ave
Williamson, NY
Speonk Lumber Corp
(631) 325-0303
207 Montauk Hwy
Speonk, NY
ADS Masonry
585-698-0756
1900 university ave
rochester, NY
L & B Fine Home Improvement Supply
(718) 852-0343
360 Hamilton Ave
Brooklyn, NY
Strober Building Supply Inc
(845) 268-9245
102 N Route 9W
Congers, NY
Super Stud Bldg Prod Inc
(718) 545-5700
801 26th Ave
Astoria, NY
Dowling Lumber & Hardware Llc
(315) 363-5700
169 Cedar St
Oneida, NY

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: May 1, 2007

By Lorella Angelini

High-build coatings are much more than paint over concrete block or other concrete surfaces. They are high-tech products characterized by properties such as resistance to wind-driven rain, chalking and checking after weathering, high ultimate (breaking) elongation, elongation recovery and crack bridging capability, and water vapor permeability.

This article focuses on the benefits in using high-build coatings as surface treatments over concrete, points out their unique performance properties, and explains applicable ASTM test methods.

Coatings vs. paints
Graph illustrates the relationship between temperature and thickness, with the thin elastomeric coating breaking at the maximum crack extension in cold temperatures.

At a glance, acrylic high-build coatings are often mistaken for ordinary paints. They come in a pail, are applied on the wall by roll or spray, and are available in a variety of colors, either directly from the factory or tinted at the local distributor. However, the similarities end here.

High-build coatings are generally applied in one or two coats to a total dry film of 10 mils to 15 mils, while ordinary paints have average thicknesses from 3 mils to 5 mils. The difference in thickness is directly related to the viscosity of the two materials and their percent of solids. High-build coatings contain about 50% solids by volume, versus 30% for ordinary products.

Click here to read full article from Masonry Construction