High-Build Coatings Selden NY

High-build coatings are much more than paint over concrete block or other concrete surfaces in Selden. They are high-tech products characterized by properties such as resistance to wind-driven rain, chalking and checking after weathering, high ultimate (breaking) elongation, elongation recovery and crack bridging capability, and water vapor permeability.

Local Companies

Agl Land Design Inc
(631) 673-2854
19 Duncan Ln
Huntington, NY
Capstone Construction
(631) 784-7701
775 Park Ave
Huntington, NY
Prima Plastering Inc
(631) 427-8699
77 Soundview Rd
Huntington, NY
Home Depot the
(631) 732-9200
401 Independence Plz
Selden, NY
Beckerle Lumber Supply Co Inc
(845) 359-4633
219 Route 303
Orangeburg, NY
Bixby Brink Landscape Contractors
(631) 673-7650
16 Gloria Ln
Huntington, NY
Bosco & Sons Mason Contracting
(631) 385-9107
1036 Park Ave
Huntington, NY
Fort Hill Landscape And Design Inc
(631) 271-8651
151 New York Ave
Huntington, NY
Anastasio Inc
(631) 499-1777
1633 E Jericho Tpke
Huntington, NY
88 - Bc Building Supplies Inc
(607) 693-3200
165 State Highway 7
Harpursville, NY

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: May 1, 2007

By Lorella Angelini

High-build coatings are much more than paint over concrete block or other concrete surfaces. They are high-tech products characterized by properties such as resistance to wind-driven rain, chalking and checking after weathering, high ultimate (breaking) elongation, elongation recovery and crack bridging capability, and water vapor permeability.

This article focuses on the benefits in using high-build coatings as surface treatments over concrete, points out their unique performance properties, and explains applicable ASTM test methods.

Coatings vs. paints
Graph illustrates the relationship between temperature and thickness, with the thin elastomeric coating breaking at the maximum crack extension in cold temperatures.

At a glance, acrylic high-build coatings are often mistaken for ordinary paints. They come in a pail, are applied on the wall by roll or spray, and are available in a variety of colors, either directly from the factory or tinted at the local distributor. However, the similarities end here.

High-build coatings are generally applied in one or two coats to a total dry film of 10 mils to 15 mils, while ordinary paints have average thicknesses from 3 mils to 5 mils. The difference in thickness is directly related to the viscosity of the two materials and their percent of solids. High-build coatings contain about 50% solids by volume, versus 30% for ordinary products.

Click here to read full article from Masonry Construction

Related Articles
- High Cement Content Problems Selden NY
Portland cement gives a mortar added durability, high early strength, a consistent hardening rate, and high compressive and bond strengths. However, mortar with excessively high cement contents can affect water permeability and durability of the masonry.
- Hidden Decking Fasteners Selden NY
- Entryway Doors Selden NY
- Form-Release Agents Selden NY
- Green and Healthy Products Selden NY
- Exterior Products Selden NY
- Dry Window Products Selden NY
- Home Improvement Marketing Selden NY
- Framing a Pergola Selden NY
- Easy SATA Selden NY