High-Build Coatings Saugerties NY

High-build coatings are much more than paint over concrete block or other concrete surfaces in Saugerties. They are high-tech products characterized by properties such as resistance to wind-driven rain, chalking and checking after weathering, high ultimate (breaking) elongation, elongation recovery and crack bridging capability, and water vapor permeability.

Local Companies

Allied Building Supply Inc
(718) 519-1884
3310 Merritt Ave
Bronx, NY
Lowes Home Improvement
(585) 453-7500
3150 Ridge Rd W
Rochester, NY
Babcock Lumber Co
(585) 924-4670
6063 Collett Rd
Farmington, NY
Abulawi Key Tile & Stone Inc
(718) 965-6666
586 3rd Ave
Brooklyn, NY
Lowe's Home Improvement Warehouse of Norwich
(607) 334-1300
5411 State Highway 12
Norwich, NY
Saugerties Lumber Co Inc
(845) 246-4915
Ulster Ave
Saugerties, NY
General Building Supply Corp
(212) 924-7202
1123 Broadway Ph
New York, NY
Thermal Foams Inc
(716) 874-6474
2101 Kenmore Ave
Buffalo, NY
Hughes C Hardware & Lumber
(315) 942-2013
157 Main St
Boonville, NY
Francis N George Inc
(585) 535-7370
791 Centerline Rd
Strykersville, NY

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: May 1, 2007

By Lorella Angelini

High-build coatings are much more than paint over concrete block or other concrete surfaces. They are high-tech products characterized by properties such as resistance to wind-driven rain, chalking and checking after weathering, high ultimate (breaking) elongation, elongation recovery and crack bridging capability, and water vapor permeability.

This article focuses on the benefits in using high-build coatings as surface treatments over concrete, points out their unique performance properties, and explains applicable ASTM test methods.

Coatings vs. paints
Graph illustrates the relationship between temperature and thickness, with the thin elastomeric coating breaking at the maximum crack extension in cold temperatures.

At a glance, acrylic high-build coatings are often mistaken for ordinary paints. They come in a pail, are applied on the wall by roll or spray, and are available in a variety of colors, either directly from the factory or tinted at the local distributor. However, the similarities end here.

High-build coatings are generally applied in one or two coats to a total dry film of 10 mils to 15 mils, while ordinary paints have average thicknesses from 3 mils to 5 mils. The difference in thickness is directly related to the viscosity of the two materials and their percent of solids. High-build coatings contain about 50% solids by volume, versus 30% for ordinary products.

Click here to read full article from Masonry Construction

Related Articles
- High Cement Content Problems Saugerties NY
Portland cement gives a mortar added durability, high early strength, a consistent hardening rate, and high compressive and bond strengths. However, mortar with excessively high cement contents can affect water permeability and durability of the masonry.
- Green and Healthy Products Saugerties NY
- Form-Release Agents Saugerties NY
- Hidden Decking Fasteners Saugerties NY
- Easy SATA Saugerties NY
- Home Improvement Marketing Saugerties NY
- Dry Window Products Saugerties NY
- Framing a Pergola Saugerties NY
- Exterior Products Saugerties NY
- Entryway Doors Saugerties NY