High-Build Coatings Penfield NY

High-build coatings are much more than paint over concrete block or other concrete surfaces in Penfield. They are high-tech products characterized by properties such as resistance to wind-driven rain, chalking and checking after weathering, high ultimate (breaking) elongation, elongation recovery and crack bridging capability, and water vapor permeability.

Local Companies

Ses Electrical Supply
(315) 287-9038
49 E Main St
Gouverneur, NY
Harmco Fastener Company Inc
(585) 546-1650
428 State St
Rochester, NY
Yarg Corp
(718) 941-9513
647 Flatbush Ave
Brooklyn, NY
Gk Building Supply Corp
(914) 939-4155
115 Oak St
Port Chester, NY
Mr Second's Bargain Outlet
(585) 235-7000
965 Maple St
Rochester, NY
ADS Masonry
585-698-0756
1900 university ave
rochester, NY
Beckerle Lumber Supply Co Inc
(845) 356-1600
3 Chestnutridge St
Spring Valley, NY
Home Depot the
(516) 546-6280
160 E Sunrise Hwy Bldg B
Freeport, NY
84 Lumber Co
(716) 731-4184
2181 Lockport Rd
Niagara Falls, NY
84 Lumber Co
(631) 473-0788
2 Route 112
Port Jefferson Station, NY

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: May 1, 2007

By Lorella Angelini

High-build coatings are much more than paint over concrete block or other concrete surfaces. They are high-tech products characterized by properties such as resistance to wind-driven rain, chalking and checking after weathering, high ultimate (breaking) elongation, elongation recovery and crack bridging capability, and water vapor permeability.

This article focuses on the benefits in using high-build coatings as surface treatments over concrete, points out their unique performance properties, and explains applicable ASTM test methods.

Coatings vs. paints
Graph illustrates the relationship between temperature and thickness, with the thin elastomeric coating breaking at the maximum crack extension in cold temperatures.

At a glance, acrylic high-build coatings are often mistaken for ordinary paints. They come in a pail, are applied on the wall by roll or spray, and are available in a variety of colors, either directly from the factory or tinted at the local distributor. However, the similarities end here.

High-build coatings are generally applied in one or two coats to a total dry film of 10 mils to 15 mils, while ordinary paints have average thicknesses from 3 mils to 5 mils. The difference in thickness is directly related to the viscosity of the two materials and their percent of solids. High-build coatings contain about 50% solids by volume, versus 30% for ordinary products.

Click here to read full article from Masonry Construction

Related Articles
- Form-Release Agents Penfield NY
Form-release agents or form oils represent only a small fraction of the cost of a manufactured concrete item, but they have a big influence on the quality and appearance of the concrete surface.
- Hidden Decking Fasteners Penfield NY
- Dry Window Products Penfield NY
- Easy SATA Penfield NY
- Exterior Products Penfield NY
- High Cement Content Problems Penfield NY
- Home Improvement Marketing Penfield NY
- Entryway Doors Penfield NY
- Framing a Pergola Penfield NY
- Green and Healthy Products Penfield NY