High-Build Coatings Patchogue NY

High-build coatings are much more than paint over concrete block or other concrete surfaces in Patchogue. They are high-tech products characterized by properties such as resistance to wind-driven rain, chalking and checking after weathering, high ultimate (breaking) elongation, elongation recovery and crack bridging capability, and water vapor permeability.

Local Companies

Mike's Lumber Store Inc
(212) 787-6661
254 W 88th St
New York, NY
Placid Property Maintenance Corp
(845) 567-9248
334 Avenue of Americas
New Windsor, NY
Overhead Door Co of Long Island Inc
(631) 422-0666
400 Park Ave
Babylon, NY
84 Lumber Co
(607) 775-5349

Binghamton, NY
L & B Fine Home Improvement Supply
(718) 852-0343
360 Hamilton Ave
Brooklyn, NY
National Roofing Supplies Inc
(631) 475-5215
470 W Main St
Patchogue, NY
Erie Materials-Syracuse Inc
(315) 454-6017
101 Kuhn Rd
Syracuse, NY
Century Building Materials Llc
(631) 888-8810
275 Sunrise Hwy
Lindenhurst, NY
Nasco Stoneworks Inc
(631) 754-0530
1007 3rd St
East Northport, NY
Agr Windows Inc
(212) 942-1249
4848 Broadway Apt 4A
New York, NY

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: May 1, 2007

By Lorella Angelini

High-build coatings are much more than paint over concrete block or other concrete surfaces. They are high-tech products characterized by properties such as resistance to wind-driven rain, chalking and checking after weathering, high ultimate (breaking) elongation, elongation recovery and crack bridging capability, and water vapor permeability.

This article focuses on the benefits in using high-build coatings as surface treatments over concrete, points out their unique performance properties, and explains applicable ASTM test methods.

Coatings vs. paints
Graph illustrates the relationship between temperature and thickness, with the thin elastomeric coating breaking at the maximum crack extension in cold temperatures.

At a glance, acrylic high-build coatings are often mistaken for ordinary paints. They come in a pail, are applied on the wall by roll or spray, and are available in a variety of colors, either directly from the factory or tinted at the local distributor. However, the similarities end here.

High-build coatings are generally applied in one or two coats to a total dry film of 10 mils to 15 mils, while ordinary paints have average thicknesses from 3 mils to 5 mils. The difference in thickness is directly related to the viscosity of the two materials and their percent of solids. High-build coatings contain about 50% solids by volume, versus 30% for ordinary products.

Click here to read full article from Masonry Construction