High-Build Coatings Long Island City NY

High-build coatings are much more than paint over concrete block or other concrete surfaces in Long Island City. They are high-tech products characterized by properties such as resistance to wind-driven rain, chalking and checking after weathering, high ultimate (breaking) elongation, elongation recovery and crack bridging capability, and water vapor permeability.

Local Companies

E C Hufnagel Landscaping Inc
(201) 869-5680
51 Broad Ave Apt 1
Fairview, NJ
Villa Stucco
(201) 653-9447
54 Jefferson Ave
Jersey City, NJ
Cotumaccio Luigi Masonry Contrctng Co
(718) 776-2661
9071 198th St
Jamaica, NY
Peter Home Improvements Corp
(718) 699-8441
5841 Waldron St
Flushing, NY
Academic Stone Setters Inc
(718) 463-7395
2907 119th St
Flushing, NY
Hatiya Contracting Inc
718-395-7744
9322 74th Place
Woodhaven, NY
Willow Snow Removal
(201) 659-7266
67 Pollock Ave
Jersey City, NJ
Malatesta Paladino Inc
(718) 523-5656
13919 109th Ave
Jamaica, NY
Obama Inc
(718) 321-0380
13225 Maple Ave
Flushing, NY
Pezzino Nely
(718) 358-1481
2221 Parsons Blvd
Flushing, NY

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: May 1, 2007

By Lorella Angelini

High-build coatings are much more than paint over concrete block or other concrete surfaces. They are high-tech products characterized by properties such as resistance to wind-driven rain, chalking and checking after weathering, high ultimate (breaking) elongation, elongation recovery and crack bridging capability, and water vapor permeability.

This article focuses on the benefits in using high-build coatings as surface treatments over concrete, points out their unique performance properties, and explains applicable ASTM test methods.

Coatings vs. paints
Graph illustrates the relationship between temperature and thickness, with the thin elastomeric coating breaking at the maximum crack extension in cold temperatures.

At a glance, acrylic high-build coatings are often mistaken for ordinary paints. They come in a pail, are applied on the wall by roll or spray, and are available in a variety of colors, either directly from the factory or tinted at the local distributor. However, the similarities end here.

High-build coatings are generally applied in one or two coats to a total dry film of 10 mils to 15 mils, while ordinary paints have average thicknesses from 3 mils to 5 mils. The difference in thickness is directly related to the viscosity of the two materials and their percent of solids. High-build coatings contain about 50% solids by volume, versus 30% for ordinary products.

Click here to read full article from Masonry Construction