High-Build Coatings Glen Cove NY

High-build coatings are much more than paint over concrete block or other concrete surfaces in Glen Cove. They are high-tech products characterized by properties such as resistance to wind-driven rain, chalking and checking after weathering, high ultimate (breaking) elongation, elongation recovery and crack bridging capability, and water vapor permeability.

Local Companies

SLR Industries Inc.
631 893 3934
411 Broadway
West Babylon, NY
Sanyo Enterprises Usa Inc
(718) 846-8100
11617 Sutphin Blvd
Jamaica, NY
Agl Land Design Inc
(631) 673-2854
19 Duncan Ln
Huntington, NY
Obama Inc
(718) 321-0380
13225 Maple Ave
Flushing, NY
Pezzino Nely
(718) 358-1481
2221 Parsons Blvd
Flushing, NY
Hatiya Contracting Inc
718-395-7744
9322 74th Place
Woodhaven, NY
Mr B Home Repairs
(718) 206-4900
10640 Guy R Brewer Blvd
Jamaica, NY
Bixby Brink Landscape Contractors
(631) 673-7650
16 Gloria Ln
Huntington, NY
Capstone Construction
(631) 784-7701
775 Park Ave
Huntington, NY
Peter Home Improvements Corp
(718) 699-8441
5841 Waldron St
Flushing, NY

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: May 1, 2007

By Lorella Angelini

High-build coatings are much more than paint over concrete block or other concrete surfaces. They are high-tech products characterized by properties such as resistance to wind-driven rain, chalking and checking after weathering, high ultimate (breaking) elongation, elongation recovery and crack bridging capability, and water vapor permeability.

This article focuses on the benefits in using high-build coatings as surface treatments over concrete, points out their unique performance properties, and explains applicable ASTM test methods.

Coatings vs. paints
Graph illustrates the relationship between temperature and thickness, with the thin elastomeric coating breaking at the maximum crack extension in cold temperatures.

At a glance, acrylic high-build coatings are often mistaken for ordinary paints. They come in a pail, are applied on the wall by roll or spray, and are available in a variety of colors, either directly from the factory or tinted at the local distributor. However, the similarities end here.

High-build coatings are generally applied in one or two coats to a total dry film of 10 mils to 15 mils, while ordinary paints have average thicknesses from 3 mils to 5 mils. The difference in thickness is directly related to the viscosity of the two materials and their percent of solids. High-build coatings contain about 50% solids by volume, versus 30% for ordinary products.

Click here to read full article from Masonry Construction

Related Articles
- Form-Release Agents Glen Cove NY
Form-release agents or form oils represent only a small fraction of the cost of a manufactured concrete item, but they have a big influence on the quality and appearance of the concrete surface.
- High Cement Content Problems Glen Cove NY
- Dry Window Products Glen Cove NY
- Framing a Pergola Glen Cove NY
- Easy SATA Glen Cove NY
- Green and Healthy Products Glen Cove NY
- Entryway Doors Glen Cove NY
- Exterior Products Glen Cove NY
- Hidden Decking Fasteners Glen Cove NY
- Home Improvement Marketing Glen Cove NY