High-Build Coatings Fulton NY

High-build coatings are much more than paint over concrete block or other concrete surfaces in Fulton. They are high-tech products characterized by properties such as resistance to wind-driven rain, chalking and checking after weathering, high ultimate (breaking) elongation, elongation recovery and crack bridging capability, and water vapor permeability.

Local Companies

La Face Tile & Mason Co Inc
(315) 371-6964
414 Butternut St
Syracuse, NY
Tersal Construction
(315) 476-6762
109 Factory Ave
Syracuse, NY
Home Depot Inc Store 1231
(716) 677-7445
1881 Ridge Rd
Buffalo, NY
Allerdice Building Supply
(518) 584-5533
41 Walworth St
Saratoga Springs, NY
Brooklyn Lumber Corp
(718) 633-3100
1106 60th St
Brooklyn, NY
Hopkins & Reilly Mason Contractors Inc
(315) 474-0161
419 Hiawatha Blvd E
Syracuse, NY
Schneid Construction
(315) 479-9004
210 6th St
Syracuse, NY
Fredrickson Builders Supply
(716) 595-3100
320 Maple Ave
Cassadaga, NY
Riverhead Building Supply
(631) 324-7037
1 Cove Hollow Rd
East Hampton, NY
Home Improvement Building Supplies
(718) 832-5000
711 3rd Ave
Brooklyn, NY

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: May 1, 2007

By Lorella Angelini

High-build coatings are much more than paint over concrete block or other concrete surfaces. They are high-tech products characterized by properties such as resistance to wind-driven rain, chalking and checking after weathering, high ultimate (breaking) elongation, elongation recovery and crack bridging capability, and water vapor permeability.

This article focuses on the benefits in using high-build coatings as surface treatments over concrete, points out their unique performance properties, and explains applicable ASTM test methods.

Coatings vs. paints
Graph illustrates the relationship between temperature and thickness, with the thin elastomeric coating breaking at the maximum crack extension in cold temperatures.

At a glance, acrylic high-build coatings are often mistaken for ordinary paints. They come in a pail, are applied on the wall by roll or spray, and are available in a variety of colors, either directly from the factory or tinted at the local distributor. However, the similarities end here.

High-build coatings are generally applied in one or two coats to a total dry film of 10 mils to 15 mils, while ordinary paints have average thicknesses from 3 mils to 5 mils. The difference in thickness is directly related to the viscosity of the two materials and their percent of solids. High-build coatings contain about 50% solids by volume, versus 30% for ordinary products.

Click here to read full article from Masonry Construction

Related Articles
- Exterior Products Fulton NY
Even with surging interest in green building and sustainability, new construction and renovation projects continue to deplete vast quantities of resources. Remodeling, in particular, is a double-edged sword--the new house consumes materials, the demolition of the old structure generates debris.
- Framing a Pergola Fulton NY
- High Cement Content Problems Fulton NY
- Form-Release Agents Fulton NY
- Easy SATA Fulton NY
- Dry Window Products Fulton NY
- Home Improvement Marketing Fulton NY
- Green and Healthy Products Fulton NY
- Hidden Decking Fasteners Fulton NY
- Entryway Doors Fulton NY