High-Build Coatings Bayside NY

High-build coatings are much more than paint over concrete block or other concrete surfaces in Bayside. They are high-tech products characterized by properties such as resistance to wind-driven rain, chalking and checking after weathering, high ultimate (breaking) elongation, elongation recovery and crack bridging capability, and water vapor permeability.

Local Companies

E C Hufnagel Landscaping Inc
(201) 869-5680
51 Broad Ave Apt 1
Fairview, NJ
Ugolini Elio Mason Contractor
(201) 433-4304
213 Harrison Ave
Jersey City, NJ
Villa Stucco
(201) 653-9447
54 Jefferson Ave
Jersey City, NJ
Mr B Home Repairs
(718) 206-4900
10640 Guy R Brewer Blvd
Jamaica, NY
Pezzino Nely
(718) 358-1481
2221 Parsons Blvd
Flushing, NY
Hatiya Contracting Inc
718-395-7744
9322 74th Place
Woodhaven, NY
Rapid Masonry Restoration
(718) 424-8304
7906 37th Ave
Jackson Heights, NY
Jetco Unlimited Exterior Building Restoration & Maintenance
(201) 798-3178
268 New York Ave
Jersey City, NJ
Malatesta Paladino Inc
(718) 523-5656
13919 109th Ave
Jamaica, NY
Cotumaccio Luigi Masonry Contrctng Co
(718) 776-2661
9071 198th St
Jamaica, NY

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: May 1, 2007

By Lorella Angelini

High-build coatings are much more than paint over concrete block or other concrete surfaces. They are high-tech products characterized by properties such as resistance to wind-driven rain, chalking and checking after weathering, high ultimate (breaking) elongation, elongation recovery and crack bridging capability, and water vapor permeability.

This article focuses on the benefits in using high-build coatings as surface treatments over concrete, points out their unique performance properties, and explains applicable ASTM test methods.

Coatings vs. paints
Graph illustrates the relationship between temperature and thickness, with the thin elastomeric coating breaking at the maximum crack extension in cold temperatures.

At a glance, acrylic high-build coatings are often mistaken for ordinary paints. They come in a pail, are applied on the wall by roll or spray, and are available in a variety of colors, either directly from the factory or tinted at the local distributor. However, the similarities end here.

High-build coatings are generally applied in one or two coats to a total dry film of 10 mils to 15 mils, while ordinary paints have average thicknesses from 3 mils to 5 mils. The difference in thickness is directly related to the viscosity of the two materials and their percent of solids. High-build coatings contain about 50% solids by volume, versus 30% for ordinary products.

Click here to read full article from Masonry Construction

Related Articles
- Form-Release Agents Bayside NY
Form-release agents or form oils represent only a small fraction of the cost of a manufactured concrete item, but they have a big influence on the quality and appearance of the concrete surface.
- Framing a Pergola Bayside NY
- Easy SATA Bayside NY
- Exterior Products Bayside NY
- Green and Healthy Products Bayside NY
- High Cement Content Problems Bayside NY
- Hidden Decking Fasteners Bayside NY
- Home Improvement Marketing Bayside NY
- Entryway Doors Bayside NY
- Dry Window Products Bayside NY