Hidden-Fastener Tool Spencerport NY

Premium synthetic decks are the heart of my deck-building business, and I use hidden fasteners on all of my projects. In fact, I’m so familiar with hidden clips and screws that I almost wince just typing about them.

Local Companies

Mayer Hardware, Inc
(585) 288-7665
226 Winton Rd N
Rochester, NY
LOWE'S OF GREECE, NY
585 453-7500
3150 WEST RIDGE ROAD ROCHESTER, NY, 14626
Rochester, NY
Crocker's Ace Hardware
(585) 768-2360
8457 North St Rd
Le Roy, NY
The Home Depot
(585)247-0220
2361 Buffalo Road
Rochester, NY
Greece Ridge Ctr
(585) 723-5300
317 Greece Ridge Center Dr
Rochester, NY
Woodcraft - Rochester
585-292-9690
Henrietta Plaza
Rochester, NY
Fastenal- Rochester
585-247-1460
50 Spencerport Road Rochester, NY, 14606
Rochester, NY
LOWE'S OF WEBSTER, NY
585 787-7900
900 FIVE MILE LINE ROAD WEBSTER, NY, 14580
Webster, NY
Abrasive Tool Corp
585-254-4500
1555 Emerson Street
Rochester, NY
Kmart 3295 / Cross Merch
(716) 227-4350
3049 W Ridge Rd
Rochester, NY
Data Provided by:
  

by Greg DiBernardo

Premium synthetic decks are the heart of my deck-building business, and I use hidden fasteners on all of my projects. In fact, I’m so familiar with hidden clips and screws that I almost wince just typing about them. Tedious and slow, my standard method of installation had been to place the clip in a groove on the deck board, then drive a small screw into the clip and joist using either a cordless drill or an impact driver. That is, until recently, when Tiger Claw, a maker of hidden deck fasteners, introduced the TC-Gun.

TC-Gun
Tiger Claw Hidden Fasteners
800/928-4437
deckfastener.com
Street price: $279


This innovative tool was designed to speed up the installation of the company’s own TC-G clips as well as TimberTech’s CONCEALoc clips (manufactured by Tiger Claw and privately labeled by TimberTech). Tiger Claw’s clips work with Fiberon, Latitudes, Portico, TimberTech, and Trex deck boards, and with pregrooved ipe, teak, and meranti.

The pneumatic TC-Gun, a relatively lightweight and compact modified joist-hanger nailer, installs clips dramatically faster than the traditional way. The user places the clip on a holder built into the nose of the gun and, in one motion, inserts the clip into the groove on the deck board while laying the gun’s nail magazine flat on the joist. A squeeze of the trigger fastens the clip with a screw — not a nail.

Click here to read full article from Deck Magaziner