Hidden-Fastener Tool New Hyde Park NY

Premium synthetic decks are the heart of my deck-building business, and I use hidden fasteners on all of my projects. In fact, I’m so familiar with hidden clips and screws that I almost wince just typing about them.

Local Companies

Roberts Plywood Co.
800-422-4944
45 North Industry Court
Deer Park, NY
Costello's Ace Hardware
(631) 243-2220
770-14 Grand Blvd
Deer Park, NY
Best Hardware & Mill Supplies
516-354-0529
406 Jericho Turnpike
Floral Park, NY
The Home Depot
(212)888-1512
980 3rd Ave
New York, NY
Lowe's
(516) 733-7840
920 South Broadway
Hicksville, NY
Monster Woodshop
888-506-6678
607 18th Street
Brooklyn, NY
Suburban Mills
631-351-6445
16 Railroad St
Huntington Station, NY
Costello's Ace Hardware
(631) 694-1100
1102 Broadhollow Rd, Corner of Rte. 110 & Main St.
Farmingdale, NY
The Home Depot
(201)868-8125
7605 Tonnelle Avenue
North Bergen, NJ
The Home Depot
(718)827-9568
579 Gateway Drive
Brooklyn, NY
Data Provided by:
  

by Greg DiBernardo

Premium synthetic decks are the heart of my deck-building business, and I use hidden fasteners on all of my projects. In fact, I’m so familiar with hidden clips and screws that I almost wince just typing about them. Tedious and slow, my standard method of installation had been to place the clip in a groove on the deck board, then drive a small screw into the clip and joist using either a cordless drill or an impact driver. That is, until recently, when Tiger Claw, a maker of hidden deck fasteners, introduced the TC-Gun.

TC-Gun
Tiger Claw Hidden Fasteners
800/928-4437
deckfastener.com
Street price: $279


This innovative tool was designed to speed up the installation of the company’s own TC-G clips as well as TimberTech’s CONCEALoc clips (manufactured by Tiger Claw and privately labeled by TimberTech). Tiger Claw’s clips work with Fiberon, Latitudes, Portico, TimberTech, and Trex deck boards, and with pregrooved ipe, teak, and meranti.

The pneumatic TC-Gun, a relatively lightweight and compact modified joist-hanger nailer, installs clips dramatically faster than the traditional way. The user places the clip on a holder built into the nose of the gun and, in one motion, inserts the clip into the groove on the deck board while laying the gun’s nail magazine flat on the joist. A squeeze of the trigger fastens the clip with a screw — not a nail.

Click here to read full article from Deck Magaziner