Hidden-Fastener Tool Mount Kisco NY

Premium synthetic decks are the heart of my deck-building business, and I use hidden fasteners on all of my projects. In fact, I’m so familiar with hidden clips and screws that I almost wince just typing about them.

Local Companies

Fastenal- Buchanan
914-736-0156
12B White St Buchanan, NY, 10511
Buchanan, NY
Ring's End Lumber/South Salem
(914) 533-2517
Rte. 123 Smithfield Rd South Salem, NY, 10590
South Salem, NY
The Home Depot
(914)593-7110
1 Saw Mill River Road
Hawthorne, NY
Kmart 9416 / Cross Merch
(914) 684-1184
399 Tarrytown Rd
White Plains, NY
Kmart 9415 / Cross Merch
(845) 628-6247
987 Route 6
Mahopac, NY
Woodcraft - Norwalk, CT
(203) 847-9663
215 Westport Ave
Norwalk, CT
On Time Supply
845-352-8600
14 Melnick Dr Monsey, NY, 10952
Monsey, NY
Cos Cob Hardware
203-869-9254
136 Post Road
Cos Cob, CT
White Plains - A
(914) 644-1400
100 Main St
White Plains, NY
Nanuet Mall
(845) 627-4500
75 W Route 59 Ste 100
Nanuet, NY
Data Provided by:
  

by Greg DiBernardo

Premium synthetic decks are the heart of my deck-building business, and I use hidden fasteners on all of my projects. In fact, I’m so familiar with hidden clips and screws that I almost wince just typing about them. Tedious and slow, my standard method of installation had been to place the clip in a groove on the deck board, then drive a small screw into the clip and joist using either a cordless drill or an impact driver. That is, until recently, when Tiger Claw, a maker of hidden deck fasteners, introduced the TC-Gun.

TC-Gun
Tiger Claw Hidden Fasteners
800/928-4437
deckfastener.com
Street price: $279


This innovative tool was designed to speed up the installation of the company’s own TC-G clips as well as TimberTech’s CONCEALoc clips (manufactured by Tiger Claw and privately labeled by TimberTech). Tiger Claw’s clips work with Fiberon, Latitudes, Portico, TimberTech, and Trex deck boards, and with pregrooved ipe, teak, and meranti.

The pneumatic TC-Gun, a relatively lightweight and compact modified joist-hanger nailer, installs clips dramatically faster than the traditional way. The user places the clip on a holder built into the nose of the gun and, in one motion, inserts the clip into the groove on the deck board while laying the gun’s nail magazine flat on the joist. A squeeze of the trigger fastens the clip with a screw — not a nail.

Click here to read full article from Deck Magaziner

Related Articles