Hidden-Fastener Tool Mineola NY

Premium synthetic decks are the heart of my deck-building business, and I use hidden fasteners on all of my projects. In fact, I’m so familiar with hidden clips and screws that I almost wince just typing about them.

Local Companies

Monster Woodshop
888-506-6678
607 18th Street
Brooklyn, NY
Suburban Mills
631-351-6445
16 Railroad St
Huntington Station, NY
Brickman Outlets Inc
(212) 777-1500
125 W 3rd St, The Blue Note
New York, NY
The Home Depot
(718)827-9568
579 Gateway Drive
Brooklyn, NY
Kmart 9419 / Cross Merch
(718) 821-2412
66-26 Metropolitan Ave
Middle Vlg, NY
EXOTIC WOODS USA
(631) 651-8651
698 Fort Salonga Rd
Northport, NY
Roberts Plywood Co.
800-422-4944
45 North Industry Court
Deer Park, NY
Costello's Ace Hardware
(516) 431-2500
3965 Long Beach Rd, Outback
Island Park, NY
Decorama Bldg & Plb Supply Inc
718-651-1800
1233 Metropolitan Ave
Brooklyn, NY
The Home Depot
(516)823-0700
101 Green Acres Road
Valley Stream, NY
Data Provided by:
  

by Greg DiBernardo

Premium synthetic decks are the heart of my deck-building business, and I use hidden fasteners on all of my projects. In fact, I’m so familiar with hidden clips and screws that I almost wince just typing about them. Tedious and slow, my standard method of installation had been to place the clip in a groove on the deck board, then drive a small screw into the clip and joist using either a cordless drill or an impact driver. That is, until recently, when Tiger Claw, a maker of hidden deck fasteners, introduced the TC-Gun.

TC-Gun
Tiger Claw Hidden Fasteners
800/928-4437
deckfastener.com
Street price: $279


This innovative tool was designed to speed up the installation of the company’s own TC-G clips as well as TimberTech’s CONCEALoc clips (manufactured by Tiger Claw and privately labeled by TimberTech). Tiger Claw’s clips work with Fiberon, Latitudes, Portico, TimberTech, and Trex deck boards, and with pregrooved ipe, teak, and meranti.

The pneumatic TC-Gun, a relatively lightweight and compact modified joist-hanger nailer, installs clips dramatically faster than the traditional way. The user places the clip on a holder built into the nose of the gun and, in one motion, inserts the clip into the groove on the deck board while laying the gun’s nail magazine flat on the joist. A squeeze of the trigger fastens the clip with a screw — not a nail.

Click here to read full article from Deck Magaziner