Hidden-Fastener Tool Middle Village NY

Premium synthetic decks are the heart of my deck-building business, and I use hidden fasteners on all of my projects. In fact, I’m so familiar with hidden clips and screws that I almost wince just typing about them.

Local Companies

Mitchell Simon Co Inc
(201) 568-2108
15 S Dean St
Englewood, NJ
Dick's Do it Best Hardware
212-425-1070
9 Gold Street
New York, NY
Morales Department Store
718-299-6668
1862 Jerome Ave
Bronx, NY
Atlantic Do it Best Hardware
516-623-0683
165 Atlantic Ave
Freeport, NY
Paramus Park
(201) 967-0300
585 From Rd
Paramus, NJ
Monster Woodshop
888-506-6678
607 18th Street
Brooklyn, NY
Brickman Outlets Inc
(212) 777-1500
125 W 3rd St, The Blue Note
New York, NY
Garber Building Supply
718-447-2122
98 Greenfield Avenue
Staten Island, NY
Idlewild Do it Best Hardware
718-528-1075
157-17 Rockaway Blvd
Jamaica, NY
The Home Depot
(201)521-9437
440 Route 440
Jersey City, NJ
Data Provided by:
  

by Greg DiBernardo

Premium synthetic decks are the heart of my deck-building business, and I use hidden fasteners on all of my projects. In fact, I’m so familiar with hidden clips and screws that I almost wince just typing about them. Tedious and slow, my standard method of installation had been to place the clip in a groove on the deck board, then drive a small screw into the clip and joist using either a cordless drill or an impact driver. That is, until recently, when Tiger Claw, a maker of hidden deck fasteners, introduced the TC-Gun.

TC-Gun
Tiger Claw Hidden Fasteners
800/928-4437
deckfastener.com
Street price: $279


This innovative tool was designed to speed up the installation of the company’s own TC-G clips as well as TimberTech’s CONCEALoc clips (manufactured by Tiger Claw and privately labeled by TimberTech). Tiger Claw’s clips work with Fiberon, Latitudes, Portico, TimberTech, and Trex deck boards, and with pregrooved ipe, teak, and meranti.

The pneumatic TC-Gun, a relatively lightweight and compact modified joist-hanger nailer, installs clips dramatically faster than the traditional way. The user places the clip on a holder built into the nose of the gun and, in one motion, inserts the clip into the groove on the deck board while laying the gun’s nail magazine flat on the joist. A squeeze of the trigger fastens the clip with a screw — not a nail.

Click here to read full article from Deck Magaziner

Related Articles