Hidden-Fastener Tool Camillus NY

Premium synthetic decks are the heart of my deck-building business, and I use hidden fasteners on all of my projects. In fact, I’m so familiar with hidden clips and screws that I almost wince just typing about them.

Local Companies

Village Hardware
(315) 638-4026
43 E Genesee St
Baldwinsville, NY
Lowe's
(315) 350-8961
5701 East Circle Drive
Cicero, NY
Fastenal- Syracuse
315-474-0970
920 Spencer Street Syracuse, NY, 13204
Syracuse, NY
P-b Hardware, Inc.
(315) 776-4313
143 Main Street
Port Byron, NY
Kmart 7451 / Cross Merch
(315) 598-9641
2078 State Rte 481
Fulton, NY
Skaneateles Town Square
(315) 685-5748
61 Fennell St, 3 BLOCKS NORTH OF THE VILLAGE
Skaneateles, NY
Lowe's
(315) 350-2220
5377 West Genesee Street
Camillus, NY
Fastenal- Fulton
315-593-6445
366 W. 1st St South Fulton, NY, 13069
Fulton, NY
Lowe's- Clay
315-652-1200
3856 State Route 31 Liverpool, NY, 13090
Liverpool, NY
Kmart 4034 / Cross Merch
(315) 455-7393
2803 Brewerton Rd
Mattydale, NY

by Greg DiBernardo

Premium synthetic decks are the heart of my deck-building business, and I use hidden fasteners on all of my projects. In fact, I’m so familiar with hidden clips and screws that I almost wince just typing about them. Tedious and slow, my standard method of installation had been to place the clip in a groove on the deck board, then drive a small screw into the clip and joist using either a cordless drill or an impact driver. That is, until recently, when Tiger Claw, a maker of hidden deck fasteners, introduced the TC-Gun.

TC-Gun
Tiger Claw Hidden Fasteners
800/928-4437
deckfastener.com
Street price: $279


This innovative tool was designed to speed up the installation of the company’s own TC-G clips as well as TimberTech’s CONCEALoc clips (manufactured by Tiger Claw and privately labeled by TimberTech). Tiger Claw’s clips work with Fiberon, Latitudes, Portico, TimberTech, and Trex deck boards, and with pregrooved ipe, teak, and meranti.

The pneumatic TC-Gun, a relatively lightweight and compact modified joist-hanger nailer, installs clips dramatically faster than the traditional way. The user places the clip on a holder built into the nose of the gun and, in one motion, inserts the clip into the groove on the deck board while laying the gun’s nail magazine flat on the joist. A squeeze of the trigger fastens the clip with a screw — not a nail.

Click here to read full article from Deck Magaziner

Related Articles
- Fighting Fastener Corrosion Camillus NY
Deck building used to be simpler. At the lumberyard, you’d load up on CCA-treated 2-by stock for the floor system, 6x6s for the posts, and whatever the budget allowed for the decking — anything from 1x6 pressure treated to more-expensive 1x4 Doug fir.
- Fasteners and Connectors Camillus NY
- Festool Joining System Camillus NY
- Festool C12 Cordless Drill Camillus NY
- Hitachi KM 12VC Router Combination Kit Camillus NY
- Hidden Decking Fasteners Camillus NY
- Graphisoft EcoDesigner Camillus NY
- INNOVA® 3100 Tools Camillus NY
- Framing Square Camillus NY
- Drywall Cutting and Multifunction Bench Camillus NY