Hand-Held Power Saws Yonkers NY

The WSR 1400-PE reciprocating saw features a smart power system that maintains blade speed under load and reduces cutting time. The saw is ergonomically designed with a vibration control, front hand grip, comfort side handle, and keyless blade clamp.

Local Companies

Fastenal- Kearny
973-491-2635
77 Hackensack Ave Kearny, NJ, 07032
Kearny, NJ
Cross Bay Hardware
(718) 848-5699
158-18 Cross Bay Blvd
Howard Beach, NY
The Home Depot
(212)929-9571
40 West 23rd Street
New York, NY
Kmart 9416 / Cross Merch
(914) 684-1184
399 Tarrytown Rd
White Plains, NY
Lake Success S/C
(516) 574-5500
1400 Union Tpke
New Hyde Park, NY
Lowe's
(718) 249-1151
118 2Nd Avenue
Brooklyn, NY
Lowe's of Paterson, NJ
973-341-8102
265 McLean Boulevard Paterson, NJ, 07504
Paterson, NJ
Ramsey Hardware & Paint
201-327-0433
14 East Main
Ramsey, NJ
The Home Depot
(914)593-7110
1 Saw Mill River Road
Hawthorne, NY
Willowbrook Mall
(973) 890-2000
50 Route 46
Wayne, NJ

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: February 1, 2007

By MASONRY CONSTRUCTION Staff

Reciprocating saw has ergonomic design

The WSR 1400-PE reciprocating saw features a smart power system that maintains blade speed under load and reduces cutting time. The saw is ergonomically designed with a vibration control, front hand grip, comfort side handle, and keyless blade clamp. The saw's orbital action is powered by a 13.5-amp motor with six speed settings.

Hilti Inc., 800-879-8000, www.us.hilti.com

Machine cuts deep into masonry

The TS 800 Cutquik cut-off machine works deep into masonry, stone, and steel. The user doesn't feel uncomfortable, fatiguing movement, even at 9000 rpm, due to the tool's five-point, dual element anti-vibration system. The machine comes with a specially-designed cart so it can do the work of walk-behind equipment for certain jobs.

Stihl Inc., 800-467-8445, www.stihlusa.com

Handheld tool makes square cut

The 603GC cut-off saw provides an alternative to other handheld masonry and concrete cutting tools. The saw is capable of plunge cutting to 10 in. and creates a square opening with no overcuts in material as thick as 9 in. The product has a rear port air intake and filtration system designed for wet cutting aggregate materials.

ICS Blount Inc., 800-321-1240, www.icsbestway.com

Dry-cut saw works in tight spots

The CM4SB2 4-in. masonry saw moves smoothly through tile, marble, granite, concrete brick, and similar materials. It withstands tough conditions in a dry-cutting environment. A specially-sealed armature and switch protect the tool from dust and debris and minimize vibration and noise. Its short edge-to-blade distance makes it easy to cut in tight spaces.

Hitachi Power Tools, 800-829-4752, www.hitachipowertools.com

Click here to read full article from Masonry Construction

Related Articles
- Finishing Concrete Yonkers NY
Power floating embeds the large aggregate just beneath the surface of the mortar, removes surface irregularities, and compacts the concrete while it consolidates mortar at the surface in preparation for other finishing operations. The timing of when you should power float a floor is critical. The rule of thumb on when a slab is ready for the power float is that your footprint should only be 1/4-inch deep or less, with little or no bleed- water present.
- Home Repair Tools Yonkers NY
- Innovative Products for Home Remodeling Projects Yonkers NY
- Generators, Compressors and Saws Yonkers NY
- Environmentally Friendly Oils Yonkers NY
- Drape Wall and Cloak Wall Yonkers NY
- How to Choose a Grout Vibrator Yonkers NY
- Home Improvement Product Reviews Yonkers NY
- Hand Tools Yonkers NY