Hand-Held Power Saws Utica NY

The WSR 1400-PE reciprocating saw features a smart power system that maintains blade speed under load and reduces cutting time. The saw is ergonomically designed with a vibration control, front hand grip, comfort side handle, and keyless blade clamp.

Local Companies

Fastenal- Rome
315-336-1893
6747 Martin Street Rome, NY, 13440
Rome, NY
Doyle Hardware Co Inc
315-723-7398
100 First St
Utica, NY
The Home Depot
(315)797-5300
545 French Road
New Hartford, NY
Sangertown Sq
(315) 793-3900
Rt 5 & 5A
New Hartford, NY
Kmart 9542 / Cross Merch
(315) 866-4910
200 S Washington St
Herkimer, NY
Lowe's
(315) 351-4241
4699 Middle Settlement Road
New Hartford, NY
Cavo Builders Supplies
315-724-5970
1027 Jefferson Ave
Utica, NY
Rome General Lbr Co Inc
(315) 336-2600
529 Erie Blvd W
Rome, NY
Kmart 4362 / Cross Merch
(315) 736-0876
4645 Commercial Dr
New Hartford, NY
Herkimer - Auth Hometown
(315) 866-0154
325 E Albany St
Herkimer, NY

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: February 1, 2007

By MASONRY CONSTRUCTION Staff

Reciprocating saw has ergonomic design

The WSR 1400-PE reciprocating saw features a smart power system that maintains blade speed under load and reduces cutting time. The saw is ergonomically designed with a vibration control, front hand grip, comfort side handle, and keyless blade clamp. The saw's orbital action is powered by a 13.5-amp motor with six speed settings.

Hilti Inc., 800-879-8000, www.us.hilti.com

Machine cuts deep into masonry

The TS 800 Cutquik cut-off machine works deep into masonry, stone, and steel. The user doesn't feel uncomfortable, fatiguing movement, even at 9000 rpm, due to the tool's five-point, dual element anti-vibration system. The machine comes with a specially-designed cart so it can do the work of walk-behind equipment for certain jobs.

Stihl Inc., 800-467-8445, www.stihlusa.com

Handheld tool makes square cut

The 603GC cut-off saw provides an alternative to other handheld masonry and concrete cutting tools. The saw is capable of plunge cutting to 10 in. and creates a square opening with no overcuts in material as thick as 9 in. The product has a rear port air intake and filtration system designed for wet cutting aggregate materials.

ICS Blount Inc., 800-321-1240, www.icsbestway.com

Dry-cut saw works in tight spots

The CM4SB2 4-in. masonry saw moves smoothly through tile, marble, granite, concrete brick, and similar materials. It withstands tough conditions in a dry-cutting environment. A specially-sealed armature and switch protect the tool from dust and debris and minimize vibration and noise. Its short edge-to-blade distance makes it easy to cut in tight spaces.

Hitachi Power Tools, 800-829-4752, www.hitachipowertools.com

Click here to read full article from Masonry Construction

Related Articles
- Finishing Concrete Utica NY
Power floating embeds the large aggregate just beneath the surface of the mortar, removes surface irregularities, and compacts the concrete while it consolidates mortar at the surface in preparation for other finishing operations. The timing of when you should power float a floor is critical. The rule of thumb on when a slab is ready for the power float is that your footprint should only be 1/4-inch deep or less, with little or no bleed- water present.
- Environmentally Friendly Oils Utica NY
- How to Choose a Grout Vibrator Utica NY
- Drape Wall and Cloak Wall Utica NY
- Home Improvement Product Reviews Utica NY
- Hand Tools Utica NY
- Home Repair Tools Utica NY
- Generators, Compressors and Saws Utica NY
- Innovative Products for Home Remodeling Projects Utica NY